Hi, Guest
03-25-2005, 07:20 AM
Ported box, built to the ED blueprints...
![[Image: picture.JPG]](http://fototime.com/{39777BD5-8F6C-4EEB-B7A0-538F1E95F0DB}/picture.JPG)
Ported box, deleting the spare and involves glassing the spare tire well...
![[Image: picture.JPG]](http://fototime.com/{56AAADFA-0FF0-41E9-9D3B-7F361ED31B5B}/picture.JPG)
Sealed box, glassing the entire back wall, and possibly adding glass to the walls as well...
![[Image: picture.JPG]](http://fototime.com/{A5FD702B-FC64-49AD-BF12-6A82490601B4}/picture.JPG)
Pretty much laid out in ease of install. #2 is my current choice but a variation of #3 using a larger ported enclosure is being cooked up.
I already have the sub, an Elemental Designs 16Kv.2, in the car in a 2.5 cubic foot sealed enclosure running off an Alpine T757. Pretty happy with it so far but I need to get rid of this wedge shaped box and replace it with something more suited to the car and sub.
Ported box, deleting the spare and involves glassing the spare tire well...
Sealed box, glassing the entire back wall, and possibly adding glass to the walls as well...
Pretty much laid out in ease of install. #2 is my current choice but a variation of #3 using a larger ported enclosure is being cooked up.
I already have the sub, an Elemental Designs 16Kv.2, in the car in a 2.5 cubic foot sealed enclosure running off an Alpine T757. Pretty happy with it so far but I need to get rid of this wedge shaped box and replace it with something more suited to the car and sub.
