Hi, Guest
04-04-2005, 10:56 AM
(This post was last modified: 04-04-2005, 02:00 PM by 1turbofocus.)
I have been making my own MAF housing for about a 2 months now , I have them in 2.5 inch and 3 inch
These are made from Alum piping and billet block for the electronics they are 7 inches and cost 75.00 either size
I also sell the block that the electronice bolts to so you can put them in your own piping
The black unit at the bottom of the picture is the Diablosport MAF`a this unit works with the stock electronics and is adjustable , This way if later you have more boost and need bigger injectors you wont have to recal your MAF anymore
I sell the MAF housing and the Diablosport MAF` a for 220.00
![[Image: DSC01141.jpg]](http://img.photobucket.com/albums/v683/1turbofocus/DSC01141.jpg)
Tom
These are made from Alum piping and billet block for the electronics they are 7 inches and cost 75.00 either size
I also sell the block that the electronice bolts to so you can put them in your own piping
The black unit at the bottom of the picture is the Diablosport MAF`a this unit works with the stock electronics and is adjustable , This way if later you have more boost and need bigger injectors you wont have to recal your MAF anymore
I sell the MAF housing and the Diablosport MAF` a for 220.00
Tom