Hi, Guest
08-11-2005, 02:44 PM
pin 1: hi beam
pin 2: Low beam
pin 3: turn +
pin 4: city light
pin 5: not used
pin 6: common ground
you make everything work propperly, you will need to do some creative wiring.
you will need to extend the harness from the stock grill signals, markers and grounds to behind the headlights.
the headlights are pretty easy to wire up and should be a no brainer
the parking lights get hooked to the city lightsturn signal to turn signal and then the common ground needs to be shared by both the headlight ground wire and the signal/marker gound to keep the signals from going into fast flash.
oh and there is a screw on the bottom of the headlight you need to get with a 10mm on a ratched from under the front bumper.
good luck and let me know if you need any help
pin 2: Low beam
pin 3: turn +
pin 4: city light
pin 5: not used
pin 6: common ground
you make everything work propperly, you will need to do some creative wiring.
you will need to extend the harness from the stock grill signals, markers and grounds to behind the headlights.
the headlights are pretty easy to wire up and should be a no brainer
the parking lights get hooked to the city lightsturn signal to turn signal and then the common ground needs to be shared by both the headlight ground wire and the signal/marker gound to keep the signals from going into fast flash.
oh and there is a screw on the bottom of the headlight you need to get with a 10mm on a ratched from under the front bumper.
good luck and let me know if you need any help