[bluetoy]

Rear bar is a 2 minute install. front bar is easy too. Just gotta drop the front subframe a little. There's 6 bolts holding it in you loosen the front 2 and remove the rear 4. Lower the subframe and block it down (I used a deep socket to hold it down) then it's a simple removal of the 4 bolts holding the bar in and the 2 end links. Putting te subframe back up is easy too but you just gotta be careful to put it back in the same spot (it's not automatically back in the same spot). The Suspension Dynamics setup is very nice since it's engineered to work together.