09-07-2005, 02:31 PM
anyways................ back on topic!
franck,
you need the SVT oil dipstick for the SVT header and you will need to block off the EGR inlet off the stock ZETEC(not Ztec ;) ) and a chip to keep the CEL from coming on.
you will need to lengthen the o2 sensor harnesses to work with the SVT cat.
for the SVT exhaust conversion you will need the following:
SVT header
SVT dipstick and tube
SVT cat
SVT flex
SVT exhaust or 2.25" aftermarket exhaust
all nuts and bolts
good luck
franck,
you need the SVT oil dipstick for the SVT header and you will need to block off the EGR inlet off the stock ZETEC(not Ztec ;) ) and a chip to keep the CEL from coming on.
you will need to lengthen the o2 sensor harnesses to work with the SVT cat.
for the SVT exhaust conversion you will need the following:
SVT header
SVT dipstick and tube
SVT cat
SVT flex
SVT exhaust or 2.25" aftermarket exhaust
all nuts and bolts
good luck