[Frost__2001]

keep in mind you don't have to have Euro Fogs in north america, you can order two back up lights and just move the back up light down to the bumper when you get them.


Best way to wire up the lights in a euro rear clone hatchback or wagon is to go to a scrap yard and look for a focus sedan with the 3 stage tail lights, and ripe out all the wiring with the box and the wiring leading into it in the trunk from the front of the car.

Since the signels are apart from the brake light it saves you a but load of time, when doing this, all you have to do is extend the wires down to where the back up lights are, and put them in place. Of course you'll have to do a bit of re-wiring and extending, and the change over to the euro speck holders, and your done.

You'll need the following things to do this on a hatch:

Euro rear bumper, crash foam, and either a set of white back up lights, or one, and one fog light ( more or less it's your choice to put the fog there at all ) Keep in mind if you want the rear fog to work you'll need to do more wiring.