Hi, Guest
06-18-2004, 01:33 PM
i'm not going to read all of this thread but the way our signals work you need to just disconnect the harness from the bulb socket and they wont be an issue.
you should actually hook the grill signals up to the front markers on the bumper and modify the stock grill bulb holders to work with the euro front markers adn then leave the side bumper lights from the US bumpers disconnected from the bulbholders.
this is how i had my 2000 euro bumper hooked up and had zero problems for over 3 years.
just make sure you ground out the signal and parking lights to the same ground. doing otherwise will cause a fast flash.
you should actually hook the grill signals up to the front markers on the bumper and modify the stock grill bulb holders to work with the euro front markers adn then leave the side bumper lights from the US bumpers disconnected from the bulbholders.
this is how i had my 2000 euro bumper hooked up and had zero problems for over 3 years.
just make sure you ground out the signal and parking lights to the same ground. doing otherwise will cause a fast flash.