[Clutch]

This is relatively straight forward. All you need to do is drain your coolant (if its not already spilt all over your driveway or garage floor. Disconnect your upper & lower rad hoses and swap the parts. If the fan shroud is bolted to your radiator, take both of them out as a unit if you can and put in your new ones. (make sure your wiring connections will work between your current part and the one you picked up from the salvage yard or where ever) It might be best to just swap the rad cores themselves, and put your old fan shroud & motor back into your car (cuz you know it works, and doing a job twice SUCKS!) While you have the rad out check your hoses for cracks or any signs of erosion and replace if needed.

Good Luck!

~ Clutch