Hi, Guest
11-29-2005, 10:44 AM
As long as you are on level ground and fill it to the bottom of the filler/overflow hole, everything is good. My owners manual says 2l (it also says to use ATF) but I've seen other sources specify up to 2.5l for the MTX-75. Mine usually takes around 2.4-2.5l.
The main problem with overfilling is to slow down the synchromesh units. If you find shifts are too slow or grinding, you could drain a little or go to a lighter oil.
The main problem with overfilling is to slow down the synchromesh units. If you find shifts are too slow or grinding, you could drain a little or go to a lighter oil.
.