Hi, Guest
01-07-2006, 08:44 AM
I had this problem with my front doors, Roll down your window first all the way down and take off the door pannels and then, take off the foam, and then peel up the plastic ( you don't have to take it off. )
1. un screw all the door handles and take it off the car
2. Spray the return spring with a good coating of WD40 or Giggle lube
3. Put the door handels back in place, and tighten it all back down and give it a good coating of WD40 / giggle lube
4. after all is said and done, open and colse the door repeatedly by slamming the door closed and opening it again and again, even with the unlock and lock, and you may want to spray inbetween the cracks of the door handle too, just incase.
5. put everything back to normal and your done.
1. un screw all the door handles and take it off the car
2. Spray the return spring with a good coating of WD40 or Giggle lube
3. Put the door handels back in place, and tighten it all back down and give it a good coating of WD40 / giggle lube
4. after all is said and done, open and colse the door repeatedly by slamming the door closed and opening it again and again, even with the unlock and lock, and you may want to spray inbetween the cracks of the door handle too, just incase.
5. put everything back to normal and your done.
I was the only member on this board with a Yellow Focus Sedan, and a 2002+ Euro Facelift on a sedan.