Hi, Guest
01-10-2006, 07:43 AM
Greetings
My wife has a 2000 ZX3, 140K, CAI. It has had new plugs, wires, at 100K.
This winter, when you start it, it barely runs. If you hold the gas pedal down a bit, it will run but when you realease the pedal it will idle at only around 4-500 rpm. Then, it will suddenly kick in and go to a high idle. The rest of the day is fine. We have sprayed the plug wires for moisture (although it happens when cold and clear also), checked for loose wires, etc. It feels as though a cylinder is not running and then kicks in. The plugs all check out ok.
Any ideas?
Thanks, Peter
My wife has a 2000 ZX3, 140K, CAI. It has had new plugs, wires, at 100K.
This winter, when you start it, it barely runs. If you hold the gas pedal down a bit, it will run but when you realease the pedal it will idle at only around 4-500 rpm. Then, it will suddenly kick in and go to a high idle. The rest of the day is fine. We have sprayed the plug wires for moisture (although it happens when cold and clear also), checked for loose wires, etc. It feels as though a cylinder is not running and then kicks in. The plugs all check out ok.
Any ideas?
Thanks, Peter