02-17-2006, 10:20 AM
nass,Feb 15 2006, 01:54 PM Wrote:Tantrik ZX3,Feb 15 2006, 05:19 PM Wrote:Has anyone had a valve cover leak that will not go away when you change the valve cover gasket. Could the valve cover be screwed?
[right][snapback]170637[/snapback][/right]
replace the gasket ( $60+ part from crappy tire I assume even more at the dealer ) I have the same issue and with synthetic it seems to seep through more than conventional oil.
it's a super easy fix 8 bolts and that's it. Paint the cover while it's off cause if you take it off in the future you'll need to replace that gasket again.
[right][snapback]170649[/snapback][/right]
Yikes...that's more than what I picked up from my dealership.
I have to tackle this later when it's warmer. But everyone basically nailed some good points:
- loose/overtightened valve cover bolts
- Also, make sure the surfaces are nice and clean when you're mating the gasket
Richard | Focused 24-7
2002 ZTS | Sangria Red | +400,000 km - most of it avoiding potholes 100km/h at a time
OFOC - Ontario Focus Owners Club | SVTOA-Toronto | Redline Rendezvous @ Mosport International Raceway
2002 ZTS | Sangria Red | +400,000 km - most of it avoiding potholes 100km/h at a time
OFOC - Ontario Focus Owners Club | SVTOA-Toronto | Redline Rendezvous @ Mosport International Raceway