[Frost__2001]

nass,Mar 15 2006, 04:21 PM Wrote:3 suggestions.

1) Switch, on the brake pedal is not working... kinda what flo said.
2) Possible relay, not sure if there is indeed one in there somewhere but if you have the euro tails in and never changed the bulbs they might be wired differently
3) pop the NA tails in and see if the problem is still there. That would eliminate the first 2 options.
[right][snapback]174975[/snapback][/right]

1. I'll check this one out nass thanks.
2. American bulbs don't fit the euro tails and were removed when the lights changed over.
3. I cut the wires and totally removed the light bulbs and holder to fuse the wires to the cercut board on the euro tails as the diagrams all show.

Quote:4) Security module located behind the glove box is known to cause problems like this too, my break lights went completely out, but the third break light was only working, checked fuses, it was not them, it turned out to be a bunk musk security module.

any idea on how to reset this paolo ?