[guilty]

Tools needed:
DIN removal tools
7mm socket
phillips screwdriver

Process:
1. Remove stereo

• Insert DIN removal tools into holes on deck<>
• Pull radio out (I found it easier to push on the deck from behind the dash)<>
• Unplug antenna wire and all wiring harnesses<>
  [st]
  2. Remove 4 x 7mm hex screws from the corners of the stereo opening
  3. Remove ashtray and cigarette lighter
  4. Pull bezel from stereo opening, popping the two top clips, then bottom
  5. Unscrew Hazard button LED (2 screws)
  6. Unplug cigarette lighter
  7. Unscrew HVAC control (4 screws)
  8. Unscrew Defrost buttons (3 screws) (not necessarily in this order)
  
  Pics:
  Removing stereo:
  
  
  4 x 7mm hex screws:
  <a href='http://img32.photobucket.com/albums/v96/guilty/Bezel%20Removal%20How-to/Im000050.jpg'>
  
  Pull bezel / release clips:
  
  
  Clip locations (dash):
  <a href='http://img32.photobucket.com/albums/v96/guilty/Bezel%20Removal%20How-to/Im000056.jpg'>
  
  Clip location (bezel):
  
  
  Remove all screws and the bezel is loose:
  <a href='http://img32.photobucket.com/albums/v96/guilty/Bezel%20Removal%20How-to/Im000053.jpg'>
  
  Repeat steps in opposite order for reinstall.