Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Updated Front
#1
Had the car up on stands yesterday so took the opportunity to change the lower front splitter for a replacement item (same make).
Left the lower grille out though....
[Image: Evilbat070706_0001.jpg]
Hope you like.
Focus ST170, Powerworks Big Boost SC kit, gasflowed ported and polished cylinder head, Piper exhaust cam vernier pulley, Hayward & Scott custom exhaust, RT Sports CAT, Omex 710 engine management, Magnecor KV-85 HT leads, Fidanza aluminium flywheel, Clutchmasters Stage IV clutch, Black Diamond front brake discs, Ferodo DS2500 front brake pads, EGR bodykit and spoiler, Cervinis Mach 5 bonnet, Defi gauges, Steeda Tri-Ax short shifter.
To come.....Staenz conn rods, JE custom pistons, Aquamist, Mocal oil cooler, KW Variant II coilovers, H&R anti-roll bars, Hughes Eng rear strut brace, uprated oil pump, LCR Camber plates, Rear camber bolts, Ferriday exhaust gasket, wheels.
Reply
#2
Looks good. I like the look of your car. The european front is much nicer than the north american facia. What are the things on your bumper in front of the headlights? Are they washer nozzles?
Focus man, Focus........ Team Psychological Disaster
2008 Taurus X to be modded.
2002 ZX5 parted out. Forever known as the "SLOCUS".

2010 Dyno #'s 102.96HP/105.84TQ
2011 Dyno #'s 111.44HP/115.17TQ
Still The Weakest LinkBlush

Dial 1-800-AUTO-PARTS for your local speed shop.
Reply
#3
Focus man, Focus.,Jul 7 2006, 11:55 AM Wrote:Looks good.  I like the look of your car.  The european front is much nicer than the north american facia.  What are the things on your bumper in front of the headlights?  Are they washer nozzles?
[right][snapback]196707[/snapback][/right]


Yes, Euro regulation require wahser jets for Xenon headlights.
Focus ST170, Powerworks Big Boost SC kit, gasflowed ported and polished cylinder head, Piper exhaust cam vernier pulley, Hayward & Scott custom exhaust, RT Sports CAT, Omex 710 engine management, Magnecor KV-85 HT leads, Fidanza aluminium flywheel, Clutchmasters Stage IV clutch, Black Diamond front brake discs, Ferodo DS2500 front brake pads, EGR bodykit and spoiler, Cervinis Mach 5 bonnet, Defi gauges, Steeda Tri-Ax short shifter.
To come.....Staenz conn rods, JE custom pistons, Aquamist, Mocal oil cooler, KW Variant II coilovers, H&R anti-roll bars, Hughes Eng rear strut brace, uprated oil pump, LCR Camber plates, Rear camber bolts, Ferriday exhaust gasket, wheels.
Reply
#4
very nice.
Reply
#5
I only like it because you have one of those cool looking radiotor for turbos hiding behind that bumper. :P :D :D
[Image: ncclogo.jpg]
Reply
#6
Flofocus,Jul 7 2006, 08:26 AM Wrote:I only like it because you have one of those cool looking radiotor for turbos hiding behind that bumper.  :P  :D  :D
[right][snapback]196719[/snapback][/right]


i think i just creamed my pants looking at that front......nice car......(anyone got napkins?)
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Reply
#7
HAWT :beerchug:
Reply
#8
looks like ass you silly wanker!


:P

is there something different about this EGR lip than the last?
been driving into parking blocks again? ;)
Reply
#9
Very, very nice!
Reply
#10
Well, like everyone else said, very nice! I knew of the washer nozzles were law in some parts of Europe, but didn't realize certain bulbs were necessary... interesting.
'14 Escape 2.0t
2012 5dr Ti : Traded
Reply
#11
ZX3TUNING,Jul 7 2006, 11:13 PM Wrote:looks like ass you silly wanker!

:P

What you sayin ?? :blink:



ZX3TUNING,Jul 7 2006, 11:13 PM Wrote:is there something different about this EGR lip than the last?
been driving into parking blocks again? ;)
[right][snapback]196783[/snapback][/right]

:o

Original EGR lip had too many stone chips and respray last year that was done wasn't too great. It had also cracked where it bolts up to the wheel arch inner liner.
This one was off a complete front bumper that I sourced from a friend.
Focus ST170, Powerworks Big Boost SC kit, gasflowed ported and polished cylinder head, Piper exhaust cam vernier pulley, Hayward & Scott custom exhaust, RT Sports CAT, Omex 710 engine management, Magnecor KV-85 HT leads, Fidanza aluminium flywheel, Clutchmasters Stage IV clutch, Black Diamond front brake discs, Ferodo DS2500 front brake pads, EGR bodykit and spoiler, Cervinis Mach 5 bonnet, Defi gauges, Steeda Tri-Ax short shifter.
To come.....Staenz conn rods, JE custom pistons, Aquamist, Mocal oil cooler, KW Variant II coilovers, H&R anti-roll bars, Hughes Eng rear strut brace, uprated oil pump, LCR Camber plates, Rear camber bolts, Ferriday exhaust gasket, wheels.
Reply
#12
I like everything about the car...except the hood...I hate those hoods...but, the car still kicks butt, so way to go...
Bleeding Ford Blue again...
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)