Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Mach A Like Projectors
#1
Ok guys,
so yes, I did purchase a set of those projector lights with the halo rings and the integrated indicators that are found on Ebay, however I didn't buy them from there.
Now, before you all start hating on them, they are actually very well put together and they are a lot more sturdy than my old Hella's.

So here are my questions...
How do I wire the Halo's up to make them come on when I switch my headlights on? Do I tap into the wiring for the headlights? Or is this going to draw too much power and potentially cause the wiring harness to melt? I don't know what kind of draw the halo's require, sorry. Only a positive and negative wire are supplied from each of the 2 halo's.

As for the indicators...
I want to remove the wiring from the current grill indicators and attach them to the wiring of the indicators located in the headlights. Again, only a positive and negative wire is supplied. When I look at the wires to the grill indicators (there are 3) black, blue with orange stripe and green with orange stripe... what is what?

Any help is greatly appreciated.

Steve.
Reply
#2
for the indicator lights, one on them is the wire that turns them on when you select parking lights or headlights on the switch. i believe its the green one but im not positive.

talk to paolo he is the resident readlightght mod expert
'05 Grand Cherokee LTD Hemi

'02 black ZX5 ****currently on jack stands my parents garage missing a transmission****
--FC/OBX 4-2-1 Race Header--FS Flex--MBRP catback exhaust--AEM CAI--Brembo Brakes with Hawk HPS pads--Toucan(ractive) 9mm Plug wires--FC Plug wire cover--Polished aluminum Ractive Strut Bar
Not installed: FK 60/40 Springs
Reply
#3
I think the parking light is the middle wire.
JMS US spec front lip, Rieger R-RX side skirts, Rieger R-RX rear apron, European rear bumper, European tail lights, RPMlabs grill, Painted side mirrors cover, H4 HID kit, Lamin-X yellow fogs, shorty antenna, Loder1899 replica rear spoiler, weathertech window delfector, Injen short ram air box, FC UDP pulley, FC 65mm TB, Focussport race header, Focussport flex, magnaflow hi-flow cat, MBRP catback, SCT Xcal2, ford racing spark plug wire, Tein S-tech, FK Damper kit, Eibach rear camber kit, Focussport strut bar, Painted valve cover, TeamDynamic pro race 1.2 17", Kumho SPT 205/45/17, Hawk HP, brembo blank rotors, Russell SS brakelines, Motul dot 5.1, Recaro replica seats on Recaro seat base, KKM shift surround, In-dash 7" DVD player, Tein Damper-chi doll!!
Reply
#4
The middle wire in the grill signal harness is the one that turns the lamps on in the park position, the outside wires are the ground and the one that sends the actual signal blink.

The euro/mach headlights use the "city light" (the little 194 sized bulb) as the middle wire from the grill harness, then the signal wire goes to your blinker..

And the halos usually end up looking a lot better if you don't wire them up at all ;)
Reply
#5
guilty,Apr 23 2007, 04:53 PM Wrote:The middle wire in the grill signal harness is the one that turns the lamps on in the park position, the outside wires are the ground and the one that sends the actual signal blink.

The euro/mach headlights use the "city light" (the little 194 sized bulb) as the middle wire from the grill harness, then the signal wire goes to your blinker..

And the halos usually end up looking a lot better if you don't wire them up at all ;)
[right][snapback]235979[/snapback][/right]
^^^ Makes me Laugh...
Halos Look great.
Problem is They Either Burnout early, Or have s***ty blue bulbs.
Reply
#6
guilty,Apr 23 2007, 05:53 PM Wrote:And the halos usually end up looking a lot better if you don't wire them up at all ;)
[right][snapback]235979[/snapback][/right]

lol
[Image: ncclogo.jpg]
Reply
#7
Thanks, but, I will use my own opinion whether it looks s***ty or not.

Black/guilty,
thanks for your help.
Reply
#8
what lights did you buy ? there are a hundred sets on ebay. in any case let us know how they work out and post some pics...
Im looking at some ebay brands since Im too poor to afford Hellas, and exam time is slowing my trigger response on any deals that could have been made for them.
anyone know about this brand ???
-LINK-A-RONI-
2001 ZX3..
Mods - Coming Soon
Tinited with Skull decal on front bumper passenger side.
Reply
#9
I wouldn't mind gettin a set of replacement lens that are the UK variety with the turn signal indicators - at a decent price of course!
Yellow 2000 ZX3 - Tinted Windows, SVT Air Intake, MBRP Exhaust, NewEdge Performance 2.25" Flex Pipe, Focus Sport UDP, SVT Bumper, Ford Racing 9MM Wires, K&N Filter, XCal2 ECU Upgrade, Shorty Antenna, Ported Throttle Body
190,000 KM (120,000 Miles) and counting!
Reply
#10
PDW,Apr 27 2007, 09:36 AM Wrote:what lights did you buy ? there are a hundred sets on ebay. in any case let us know how they work out and post some pics...
Im looking at some ebay brands since Im too poor to afford Hellas, and exam time is slowing my trigger response on any deals that could have been made for them.
anyone know about this brand ???
-LINK-A-RONI-
[right][snapback]236516[/snapback][/right]

I had a set of those once upon a time, got them off another member of FC. Don't waste your money, they just didn't hold up well to canadian weather.
Current
09 F150 SCREW 4X4 XTR

Former
Show
Hella Magic Module Tail Lights, 17" Ford Racing EAP rims, 5% Rear, 20% Front Tint, Panasonic CQ7401 Deck, 2 MB Quart 10's, Alpine Components, Phoenix Gold 500.1 Amp
Go
Steeda Cold Ram Air Intake MBRP Exhaust (Gen 2), FK Coilovers, Hedman Header (Install Pending),FC Hi-Flo Cat (Install Pending),EBC Greenstuff Pads

Reply
#11
^^ damn, they looked like a good alternatvie to the overly expensive hellas....
2001 ZX3..
Mods - Coming Soon
Tinited with Skull decal on front bumper passenger side.
Reply
#12
Here are the ones I have, they are installed now just have to wire up the indicators.
Halo's are working, actually don't mind the look of them. Now just going to add some eyelids to hide those gastly led's and bingo.

Pics to come.

[Image: 51_1.jpg]
Reply
#13
Alien-Tek,Apr 27 2007, 03: Wrote:Here are the ones I have, they are installed now just have to wire up the indicators.
Halo's are working, actually don't mind the look of them. Now just going to add some eyelids to hide those gastly led's and bingo.

Pics to come.

[Image: 51_1.jpg]
[right][snapback]236556[/snapback][/right]

Question for ya regarding those lights cuz i've looked at getting them a few times. The LED's on the top, is it just 2 wires to hook them up or do they each have individual wires for them? If i can light them up individually i might pick up a set i've got an interesting use for those.
Current
09 F150 SCREW 4X4 XTR

Former
Show
Hella Magic Module Tail Lights, 17" Ford Racing EAP rims, 5% Rear, 20% Front Tint, Panasonic CQ7401 Deck, 2 MB Quart 10's, Alpine Components, Phoenix Gold 500.1 Amp
Go
Steeda Cold Ram Air Intake MBRP Exhaust (Gen 2), FK Coilovers, Hedman Header (Install Pending),FC Hi-Flo Cat (Install Pending),EBC Greenstuff Pads

Reply
#14
They all have individual wiring.

What were you thinking?
Reply
#15
Alien-Tek,Apr 27 2007, 07: Wrote:They all have individual wiring.

What were you thinking?
[right][snapback]236573[/snapback][/right]

I was thinking of making something that made a sequential turn signal out of them. Haven't really put alot of thought into it but i think its doable with a few electronic components.
Current
09 F150 SCREW 4X4 XTR

Former
Show
Hella Magic Module Tail Lights, 17" Ford Racing EAP rims, 5% Rear, 20% Front Tint, Panasonic CQ7401 Deck, 2 MB Quart 10's, Alpine Components, Phoenix Gold 500.1 Amp
Go
Steeda Cold Ram Air Intake MBRP Exhaust (Gen 2), FK Coilovers, Hedman Header (Install Pending),FC Hi-Flo Cat (Install Pending),EBC Greenstuff Pads

Reply
#16
There's a company in Pennsylvania that makes the sequential modules for retrofit to Mustangs, Cougars and T-Birds (don't know if they'd work with LEDs though) - I bought a DRL module from them and a brake light flasher.

habmann,Apr 27 2007, 08:06 PM Wrote:I was thinking of making something that made a sequential turn signal out of them. Haven't really put alot of thought into it but i think its doable with a few electronic components.
[right][snapback]236574[/snapback][/right]
2008 Fusion SEL MTX - DD1 * 2009 Fusion SEL - DD2 * 2007 Focus ZXW - R*I*P * 2004 Focus ZTW CD Silver - sold * 2004 Focus ZTW Black - sold * 2003 Focus ZTW Black - sold * 2001 Focus ZTW Gold - sold * 2000 Focus SE Wagon (ZTW option) - Black - sold * 2000 Focus SE Wagon (ZTW option) - Gold R*I*P

2003 Focus ZX5 infra-red Track Rat - R*I*P
2003 ZX5 CD Silver Track Rat - retired, but still in the driveway


New track rat: 2000 ZX3, Atlantic Blue * JRSC with lots more to come

* New Zetec crate motor - NFG - thanks Topspeed *
Reply
#17
habmann,Apr 27 2007, 05:21 PM Wrote:had a set of those once upon a time, got them off another member of FC. Don't waste your money, they just didn't hold up well to canadian weather.
[right][snapback]236545[/snapback][/right]

is it just these in particular or are you warning against the hella branded lights like this as well ? like is it just the style that is bad or the brand ?
2001 ZX3..
Mods - Coming Soon
Tinited with Skull decal on front bumper passenger side.
Reply
#18
PDW,Apr 29 2007, 12:52 PM Wrote:
habmann,Apr 27 2007, 05:21 PM Wrote:had a set of those once upon a time, got them off another member of FC. Don't waste your money, they just didn't hold up well to canadian weather.
[right][snapback]236545[/snapback][/right]

is it just these in particular or are you warning against the hella branded lights like this as well ? like is it just the style that is bad or the brand ?
[right][snapback]236746[/snapback][/right]

The ones i had were hella look alikes, those are the ones i would stay away from. On mine the lenses cracked, but on these ones having the plastic cover you shouldn't have any issues. To be honest i've looked at getting a set of these for the past year or so, but being a poor student until recently i never really had the money for them. But i think i may pick up a set of the black ones and paint them to match the color of my car.
Current
09 F150 SCREW 4X4 XTR

Former
Show
Hella Magic Module Tail Lights, 17" Ford Racing EAP rims, 5% Rear, 20% Front Tint, Panasonic CQ7401 Deck, 2 MB Quart 10's, Alpine Components, Phoenix Gold 500.1 Amp
Go
Steeda Cold Ram Air Intake MBRP Exhaust (Gen 2), FK Coilovers, Hedman Header (Install Pending),FC Hi-Flo Cat (Install Pending),EBC Greenstuff Pads

Reply
#19
^^ i dont know what you mean by a plastic cover.. I dont see what you mean on the link i posted...
2001 ZX3..
Mods - Coming Soon
Tinited with Skull decal on front bumper passenger side.
Reply
#20
^^OK between the ones already being talked about in this thread and the ones you posted the link for, the difference is this. The ones in this thread are like the stock ones with the lenses behind the clear plastic shield, being that you can't touch the lenses. Where as the ones you posted the link to, the lenses are exposed to the elements and they'll crack because they aren't all that good quality.
Current
09 F150 SCREW 4X4 XTR

Former
Show
Hella Magic Module Tail Lights, 17" Ford Racing EAP rims, 5% Rear, 20% Front Tint, Panasonic CQ7401 Deck, 2 MB Quart 10's, Alpine Components, Phoenix Gold 500.1 Amp
Go
Steeda Cold Ram Air Intake MBRP Exhaust (Gen 2), FK Coilovers, Hedman Header (Install Pending),FC Hi-Flo Cat (Install Pending),EBC Greenstuff Pads

Reply


Forum Jump:


Users browsing this thread: 6 Guest(s)