Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New Lower Stress Bar From Focussport
#1
I've never heard of sub-frame flex before as a problem on Focus ... but if it is a problem apparently Focussport has a cure.

I tend to trust Focussport, but I'm wondering of this is a solution looking for a problem. Anyone know about the suspension science behind this?

Click here and scroll to bottom of the page - FS034(K)
2008 Fusion SEL MTX - DD1 * 2009 Fusion SEL - DD2 * 2007 Focus ZXW - R*I*P * 2004 Focus ZTW CD Silver - sold * 2004 Focus ZTW Black - sold * 2003 Focus ZTW Black - sold * 2001 Focus ZTW Gold - sold * 2000 Focus SE Wagon (ZTW option) - Black - sold * 2000 Focus SE Wagon (ZTW option) - Gold R*I*P

2003 Focus ZX5 infra-red Track Rat - R*I*P
2003 ZX5 CD Silver Track Rat - retired, but still in the driveway


New track rat: 2000 ZX3, Atlantic Blue * JRSC with lots more to come

* New Zetec crate motor - NFG - thanks Topspeed *
Reply
#2
this is new to me
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Reply
#3
Don't swaybars do the same thing??
Sold:2001 SE 2.0L SPI w/60mm TB, Steeda Shorty Intake.

Active: 2007 SES Hatch, Motegi MR7 Rims with 215/45ZR17 Michelin Pilot Super Sport Tires, debadged, black painted calipers and drums, RS Knob, CFM Short Throw, Billet E-Brake, CFM Focus pedals, MBRP Exhaust, XCal2, FS Front and Rear Strut Tower Bars, Diamond Plate Floor Mats and Sills, Alpine MP3 Deck, Alpine V-Power 300w Amp, Pioneer IMPP Sub, AlpineType-S door speakers, VF Engineering Rear Motor Mount, F2 RS Spoiler, Tokico D-spec shocks, HTP Cross Brace, EBC Rotors, Hawk HPS Pads, Russell SS Brake Lines, RS Wheel, SVT Blue Seats, Vibrant 2.5" Race Highflow Cat, CFM UDP. Rear SVT bumper to come.

Active: 2005 Jeep Wrangler Unlimited TJ [LJ], Volant CAI, 32" BFG Mud Terrains, and a whole bunch of goodies. Big Grin
Reply
#4
Oscar The Grouch,Jun 24 2008, 10:25 AM Wrote:Don't swaybars do the same thing??
[right][snapback]267701[/snapback][/right]
Not really - sway bar couples the suspensions on each side to each other, and relative to the chassis ... this piece seems to connect the control arms together laterally.
2008 Fusion SEL MTX - DD1 * 2009 Fusion SEL - DD2 * 2007 Focus ZXW - R*I*P * 2004 Focus ZTW CD Silver - sold * 2004 Focus ZTW Black - sold * 2003 Focus ZTW Black - sold * 2001 Focus ZTW Gold - sold * 2000 Focus SE Wagon (ZTW option) - Black - sold * 2000 Focus SE Wagon (ZTW option) - Gold R*I*P

2003 Focus ZX5 infra-red Track Rat - R*I*P
2003 ZX5 CD Silver Track Rat - retired, but still in the driveway


New track rat: 2000 ZX3, Atlantic Blue * JRSC with lots more to come

* New Zetec crate motor - NFG - thanks Topspeed *
Reply
#5
Yeah i want one.. Focus Central had one when they were still around... and i found one on ebay a while back but it was only for the Euro focus...

So i want one of these now.. theres a thread on FF about a guy who couldnt i nstall one on an SVT but theres a pic of on installed in a ZX3/5...

Looks like a good piece
Professional Certified Nut Case...
Reply
#6
it probably would help, but for the average person it would be a lot of work to put it on.
[center]TEAM PITA™ Don't settle for a wannabe, only accept the real deal.[/center]
Reply
#7
Canadian ST,Jun 24 2008, 09:51 AM Wrote:it probably would help, but for the average person it would be a lot of work to put it on.
[right][snapback]267708[/snapback][/right]


and that is why sometimes i go to asian automechanic :lol:

great prices-good work
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Reply
#8
looks like it will help traction on turns and heavy accelerating
DruZX3 You Tube Page
My Rides on Car Domain

2001 Ford Focus ZX3 - Daily Driver
2008 Lincoln MKX Limited Edition - Grocery Getter
2007 Suzuki GSXR 600 - Rode and Sold
2004 Jeep Liberty Renegade - Offroaded and Sold
2008 Jeep Wrangler Unlimited X - R.I.P. Electrical Fire
2000 Ford Focus ZX3 - Traded in Now DrunkinMonkeys Car
2003 Ford Taurus Wagon - Inherited Drove and Sold
2000 Ford Focus ZX3 Turbo - Award Winning 336 WHP - Parted and Scraped
1990 Ford Festiva - My 1st Car

[Image: ZX3PixelCarEngineVIEW.png]
Reply
#9
Canadian ST,Jun 24 2008, 09:51 AM Wrote:it probably would help, but for the average person it would be a lot of work to put it on.
[right][snapback]267708[/snapback][/right]


Nah should take you longer then 45 minutes to put on about the same time as a rear sway bar... Your going to need a heavy duty impact gun though none of this mickey mouse crap your looking at at least 600 ft lbs in reverse with a min of a 30 gallon compressor.. with the usual jack prybars hammers and so on and so on...
Professional Certified Nut Case...
Reply
#10
mister_bin,Jun 24 2008, 02:39 PM Wrote:
Canadian ST,Jun 24 2008, 09:51 AM Wrote:it probably would help, but for the average person it would be a lot of work to put it on.
[right][snapback]267708[/snapback][/right]


Nah should take you longer then 45 minutes to put on about the same time as a rear sway bar... Your going to need a heavy duty impact gun though none of this mickey mouse crap your looking at at least 600 ft lbs in reverse with a min of a 30 gallon compressor.. with the usual jack prybars hammers and so on and so on...
[right][snapback]267736[/snapback][/right]


Well is that all ;) Like I said not for the average person, I don't have any of those tools. :(
[center]TEAM PITA™ Don't settle for a wannabe, only accept the real deal.[/center]
Reply
#11
I had one on my old Escort GT. It firmed up corners nicely.

Basically, it has a similar function of the strut tower brace. It's helping keep suspension geometry 'optimal'. Less flex in the chassis, the more the suspension works rather than flexing the chassis.

If you are daily driven, I probably wouldn't recommend it (makes the ride more harsh as it removes chassis flex & quivers). If you auto-X/track days/aggressively approach clover leaves, I'd give it a try. Not too much money for the experiment, and if you don't like it, I'm sure somebody else will!

Same as a K-member brace on a Mustang...
Ryan and the Silver Sedan
++++++++++++++++++++++++
2008 Mazda5 GS/Copper Red Mica/2.3 MZR 5AT/22% Tint
[Image: 49951.png]
2011 Ford F150 FX4 Supercrew/Race Red/3.5 TT EcoBoost
Reply
#12
Canadian ST,Jun 24 2008, 02:02 PM Wrote:
mister_bin,Jun 24 2008, 02:39 PM Wrote:
Canadian ST,Jun 24 2008, 09:51 AM Wrote:it probably would help, but for the average person it would be a lot of work to put it on.
[right][snapback]267708[/snapback][/right]


Nah should take you longer then 45 minutes to put on about the same time as a rear sway bar... Your going to need a heavy duty impact gun though none of this mickey mouse crap your looking at at least 600 ft lbs in reverse with a min of a 30 gallon compressor.. with the usual jack prybars hammers and so on and so on...
[right][snapback]267736[/snapback][/right]


Well is that all ;) Like I said not for the average person, I don't have any of those tools. :(
[right][snapback]267739[/snapback][/right]


LoL Then yeah it would be a problem...



I'm gonna give it a try see what it does... maybe i'll even write a how to...
Professional Certified Nut Case...
Reply
#13
mister_bin,Jun 24 2008, 07:46 PM Wrote:
Canadian ST,Jun 24 2008, 02:02 PM Wrote:
mister_bin,Jun 24 2008, 02:39 PM Wrote:
Canadian ST,Jun 24 2008, 09:51 AM Wrote:it probably would help, but for the average person it would be a lot of work to put it on.
[right][snapback]267708[/snapback][/right]


Nah should take you longer then 45 minutes to put on about the same time as a rear sway bar... Your going to need a heavy duty impact gun though none of this mickey mouse crap your looking at at least 600 ft lbs in reverse with a min of a 30 gallon compressor.. with the usual jack prybars hammers and so on and so on...
[right][snapback]267736[/snapback][/right]


Well is that all ;) Like I said not for the average person, I don't have any of those tools. :(
[right][snapback]267739[/snapback][/right]


LoL Then yeah it would be a problem...



I'm gonna give it a try see what it does... maybe i'll even write a how to...
[right][snapback]267755[/snapback][/right]

Yah let me know what you think. I want to improve the ride of my car, without slamming it.

[center]TEAM PITA™ Don't settle for a wannabe, only accept the real deal.[/center]
Reply
#14
^^^ SVT Suspension conversion with a 22mm Rear Sway and then do all poly bushings
Professional Certified Nut Case...
Reply
#15
Canadian ST,Jun 24 2008, 08:44 PM Wrote:Yah let me know what you think. I want to improve the ride of my car, without slamming it.
[right][snapback]267768[/snapback][/right]
get a rear sway if you don't have one already as well as a strut tower brace and the rear stress bar. i have all 3 on my fofo and you should've seen how fast i cranked it around the corner at yesterdays meet lol. cars not lowered either,....at least not yet.
Little bit of show, little bit of go.
Reply
#16
Spinal,Jul 1 2008, 12:45 PM Wrote:
Canadian ST,Jun 24 2008, 08:44 PM Wrote:Yah let me know what you think. I want to improve the ride of my car, without slamming it.
[right][snapback]267768[/snapback][/right]
get a rear sway if you don't have one already as well as a strut tower brace and the rear stress bar. i have all 3 on my fofo and you should've seen how fast i cranked it around the corner at yesterdays meet lol. cars not lowered either,....at least not yet.
[right][snapback]268038[/snapback][/right]

Mine came with a 20mm rear swaybar. I was looking at the 22mm progress bar, you did notice a difference with the front and rear strut bars then? The reason I'm asking is I hears they are just for show? But since you have them installed you would know best. what does the rear strut bar do? I think its just a brace of some sort, that ties in the shocks. I was very happy with the way my car handles when I first got it, now I'm bored, so your help you be appreciated


[center]TEAM PITA™ Don't settle for a wannabe, only accept the real deal.[/center]
Reply
#17
mister_bin,Jun 24 2008, 10:39 AM Wrote:Nah should take you longer then 45 minutes to put on about the same time as a rear sway bar... Your going to need a heavy duty impact gun though none of this mickey mouse crap your looking at  at least 600 ft lbs in reverse with a min of a 30 gallon compressor.. with the usual jack prybars hammers and so on and so on...
[right][snapback]267736[/snapback][/right]

i disagree. the 2 bolts u need to remove only are 150lb ft.
i just did poly bushings last month, and i had to remove those exact bolts.

btw i did it in my driveway with jackstands and hand tools.

this is very easy and doable to install.

in fact i think im gonna build my own bar (the design is so simple)
'04 liquid grey ZX3 - my FSP auto-x car
'02 infra-red SVT  - my street car, now for sale
Reply
#18
thenorm,Jul 2 2008, 02:02 PM Wrote:
mister_bin,Jun 24 2008, 10:39 AM Wrote:Nah should take you longer then 45 minutes to put on about the same time as a rear sway bar... Your going to need a heavy duty impact gun though none of this mickey mouse crap your looking at  at least 600 ft lbs in reverse with a min of a 30 gallon compressor.. with the usual jack prybars hammers and so on and so on...
[right][snapback]267736[/snapback][/right]

i disagree. the 2 bolts u need to remove only are 150lb ft.
i just did poly bushings last month, and i had to remove those exact bolts.

btw i did it in my driveway with jackstands and hand tools.

this is very easy and doable to install.

in fact i think im gonna build my own bar (the design is so simple)
[right][snapback]268076[/snapback][/right]


build a whole bunch....maybe you can sell em for $50 :)
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Reply
#19
thenorm,Jul 2 2008, 02:02 PM Wrote:
mister_bin,Jun 24 2008, 10:39 AM Wrote:Nah should take you longer then 45 minutes to put on about the same time as a rear sway bar... Your going to need a heavy duty impact gun though none of this mickey mouse crap your looking at  at least 600 ft lbs in reverse with a min of a 30 gallon compressor.. with the usual jack prybars hammers and so on and so on...
[right][snapback]267736[/snapback][/right]

i disagree. the 2 bolts u need to remove only are 150lb ft.
i just did poly bushings last month, and i had to remove those exact bolts.

btw i did it in my driveway with jackstands and hand tools.

this is very easy and doable to install.

in fact i think im gonna build my own bar (the design is so simple)
[right][snapback]268076[/snapback][/right]


Its actually 150 ft lbs its i believe 85 ft lbs then you put a 90 degree rotation putting it between 150 -180 ft lbs... Its a bit different and the bolts are 1 time use only but i've heard from Focus sport that they can be re used.

150 ft lbs its the problem its the rust and the bolt seizing up.. I've rebuilt the front suspension on my cousins focus and those bolts wouldn't budge with out my impact.... but it was from 2000 and it had almost 200,000 km...

Another case was when i did the front brakes on my freind protoge.. The Caliper bridge bolts were speced to 65 ft lbs.. try taking them out by hand...

Even when i rebuilt my front sway bar endlinks those are speced at 68 ft lbs and i needed my gun to break them loose then with a 1/2 open socket i was able to take off the nut... Its not just the ft lbs its the corrosion and how the metal has become seized...
Professional Certified Nut Case...
Reply
#20
Canadian ST,Jul 2 2008, 09:32 AM Wrote:Mine came with a 20mm rear swaybar. I was looking at the 22mm progress bar, you did notice a difference with the front and rear strut bars then? The reason I'm asking is I hears they are just for show? But since you have them installed you would know best. what does the rear strut bar do? I think its just a brace of some sort, that ties in the shocks. I was very happy with the way my car handles when I first got it, now I'm bored, so your help you be appreciated
[right][snapback]268058[/snapback][/right]
i installed both the front and rear stress bars at different times. i did notice an improvement with the front one, it may be more show than go as the difference was not as significant compared to when i installed the rear sway bar. however when i installed the rear stress bar there was a noticeable difference. i think you have to put the front/rear ones in at the same tme to see the best gains.

as for what the rear stress bar dose it bolts onto the spot welds where the shock towers are, along the sides. and it takes the flex out of the body. my suspension is still stock (springs, shocks) but with the 50 series tires i nagged my dad for from his zx5 and the bars installed, it takes corners pretty good. i cant wait to see what its like with the drop im getting.
Little bit of show, little bit of go.
Reply


Forum Jump:


Users browsing this thread: 4 Guest(s)