Posts: 140
Threads: 13
Joined: Jan 2004
Reputation:
0
Hey Guys, just got back from the dyno about 20min ago (1:30am here) and wanted to share the results.
The customer approached us to tune his SVT Focus with JR 6psi kit because he was looking for some more power and a better all around tune.
We put the vehicle on the dyno without a tune to see what it made with no tune (how JR suggests). The car laid down 170whp/141wtq, which was decent but being pig rich with too much timing I knew there was some work to be done.
After some testing and LONG flash times the final results are 201whp/156wt on a VERY conservative tune. A/F is around 12.0 until about 6000 where it goes down to about 11.8 and final timing is like 15*. The customer was after the power gains and a VERY SAFE tune, which he now has. This setup could easily make 215/165 on a mild/agressive tune.
Final Results from Bone Stock SVT Focus with 6psi using the JR Kit:
Gain of 52whp/23wtq
This car ABSOLUTY HAULS AS$. Any Mustang driver in a fairly stock GT should watch the hell out. I am loving these cars more and more. We will be doing a customer spotlight on this vehicle...check out our site later.
:ph34r:
Black 10th Anniversary Cobra Coupe
11.1 @ 122
550RWHP 511RWTQ SAE
Tuned by Paul Meister @ Steeda.ca
http://www.steeda.ca
------------------------------------------------------------------------------------
Posts: 842
Threads: 72
Joined: May 2003
Reputation:
0
What kind of dyno was it on? I made 197/157 on a dynojet and 189/145 on a mustang dyno. With Stock jrsc setup...
Prolly Is not a word
Posts: 224
Threads: 32
Joined: Sep 2003
Reputation:
0
Great gains!...but those base numbers are much lower than I expected. :unsure:
Posts: 140
Threads: 13
Joined: Jan 2004
Reputation:
0
That is on a Dynojet and the car was just as cool on the run without a tune on it and the HP and TQ curves were no where what they are now, as well as the mannerisms of the vehicle
I need to get that graph, but the dyno operator is not the smartest
Black 10th Anniversary Cobra Coupe
11.1 @ 122
550RWHP 511RWTQ SAE
Tuned by Paul Meister @ Steeda.ca
http://www.steeda.ca
------------------------------------------------------------------------------------
Posts: 185
Threads: 1
Joined: May 2003
Reputation:
0
nice numbers *thumbsup*
I dunno if a competent drive in a 'stang owners needs to worry just yet though ;)
Car-less for the first time in years...
'01 Twilight Blue ZTS is gone...
'90 Eagle Talon TSi AWD - 15psi, 3" cat-back w/Turbo muffler, blah blah....is now gone too
Posts: 770
Threads: 55
Joined: May 2003
Reputation:
0
Marction,Jan 28 2005, 04:58 PM Wrote:nice numbers *thumbsup*
I dunno if a competent drive in a 'stang owners needs to worry just yet though ;)
[right][snapback]81686[/snapback][/right]
I would think so because I was running head to head with a GT witout tune.... ;) many many runs. so it wasnt a fluke.
------------------------------------------------
-1991 Nissan Pulsar GTI-R
-2002 Red SVT focus # 2262 - sold
-2000 silver ZX3 - sold
Posts: 185
Threads: 1
Joined: May 2003
Reputation:
0
nice! B)
Car-less for the first time in years...
'01 Twilight Blue ZTS is gone...
'90 Eagle Talon TSi AWD - 15psi, 3" cat-back w/Turbo muffler, blah blah....is now gone too
Posts: 214
Threads: 19
Joined: Mar 2004
Reputation:
0
nice gains congrats on the excellent tuning job. i was just wondering though, do you have the base dyno to share with us so we can compare the difference at certian RPM intervals? thanks
Posts: 8,622
Threads: 898
Joined: May 2003
Reputation:
6
that's not much more power than running the JRSC with the blackbox.
not saying it's a bad tune.. just one helluva safe tune.. you could probably take a few points out of the richness and probably free up 10 HP easily, and still be safe.
I would love to see those timing tables (and modifiers) tho :P.. the one thing I'm not so sure on in my tune.
Contribute to focuscanada.net's future!Donations of $20 and over get a custom title!
Posts: 1,939
Threads: 101
Joined: Aug 2004
Reputation:
0
Quote:We put the vehicle on the dyno without a tune to see what it made with no tune (how JR suggests). The car laid down 170whp/141wtq
Sounds pretty low, I would have flew off the handle and told JS where they could stick their blower... I know different makes of dyno's produce different numbers but I thought SVTF's but about 150 the the wheels. Am I wrong guys?
Awsome job on the tune anyways. I would have been a happy customer.
Posts: 842
Threads: 72
Joined: May 2003
Reputation:
0
I wish you'd have done the more aggresive tune. I'm not ready to throw down a bunch of cash to make the same dyno numbers as I am now... Let's see that 215... Then I might lay out some cash..
If I don't sell it.
Prolly Is not a word
Posts: 1,620
Threads: 61
Joined: Apr 2003
Reputation:
2
french_connection,Jan 28 2005, 01:25 PM Wrote:Marction,Jan 28 2005, 04:58 PM Wrote:nice numbers *thumbsup*
I dunno if a competent drive in a 'stang owners needs to worry just yet though ;)
[right][snapback]81686[/snapback][/right]
I would think so because I was running head to head with a GT witout tune.... ;) many many runs. so it wasnt a fluke.
[right][snapback]81711[/snapback][/right]
but I spanked you everytime :P
[center]TEAM PITA⢠Don't settle for a wannabe, only accept the real deal.[/center]
Posts: 1,157
Threads: 36
Joined: Apr 2003
Reputation:
0
Those baseline # seem rediculously low... Im glad im not the first one to chime in saying that.....
I cant see how its possible that running 6psi he was only making 25whp over the stock car.. something seems wrong?
Dan, Your friendly neighbourhood asshole.
I do installs and build FG stuff, pm me if you need help with anything. Im cheap.
Posts: 140
Threads: 13
Joined: Jan 2004
Reputation:
0
I will have the owner chime in and the orig. dyno chart found. I am just stating facts.
We stopped selling the JR kit because of the poorer numbers...working on a turbo (hopefully)
Black 10th Anniversary Cobra Coupe
11.1 @ 122
550RWHP 511RWTQ SAE
Tuned by Paul Meister @ Steeda.ca
http://www.steeda.ca
------------------------------------------------------------------------------------
Posts: 224
Threads: 32
Joined: Sep 2003
Reputation:
0
meister@steeda.ca,Jan 30 2005, 08:17 PM Wrote:...working on a turbo (hopefully)
[right][snapback]82083[/snapback][/right]
Hmmmm....keep us posted, I'd definately be interested (if the price is reasonable)!
Posts: 140
Threads: 13
Joined: Jan 2004
Reputation:
0
What is reasonable? We have 2 local customers interested in this but R&D is expensive so we need to see if it is worth it,
Black 10th Anniversary Cobra Coupe
11.1 @ 122
550RWHP 511RWTQ SAE
Tuned by Paul Meister @ Steeda.ca
http://www.steeda.ca
------------------------------------------------------------------------------------
Posts: 224
Threads: 32
Joined: Sep 2003
Reputation:
0
meister@steeda.ca,Jan 30 2005, 08:37 PM Wrote:What is reasonable? We have 2 local customers interested in this but R&D is expensive so we need to see if it is worth it,
[right][snapback]82088[/snapback][/right]
...well I'd love to see something in the $4-5k range (or less :P ). I have trouble brining myself to spend even that on 'mods'. I don't know if I'm way off target or not, but let me know :unsure: .
Posts: 140
Threads: 13
Joined: Jan 2004
Reputation:
0
If only it could be that cheap
Black 10th Anniversary Cobra Coupe
11.1 @ 122
550RWHP 511RWTQ SAE
Tuned by Paul Meister @ Steeda.ca
http://www.steeda.ca
------------------------------------------------------------------------------------
Posts: 224
Threads: 32
Joined: Sep 2003
Reputation:
0
01-31-2005, 07:55 AM
(This post was last modified: 01-31-2005, 07:57 AM by silver02svtf.)
meister@steeda.ca,Jan 30 2005, 09:42 PM Wrote:If only it could be that cheap
[right][snapback]82112[/snapback][/right]
....well my goal is actually to get around 200whp/160lb/ft without spending an amount of money the wife would bitch about ;). Now to find a jrsc (cough*bluetoy*cough)
Posts: 842
Threads: 72
Joined: May 2003
Reputation:
0
silver02svtf,Jan 30 2005, 05:55 PM Wrote:meister@steeda.ca,Jan 30 2005, 09:42 PM Wrote:If only it could be that cheap
[right][snapback]82112[/snapback][/right]
....well my goal is actually to get around 200whp/160lb/ft without spending an amount of money the wife would bitch about ;). Now to find a jrsc (cough*bluetoy*cough)
[right][snapback]82115[/snapback][/right]
Sell my car without the JRSCand it's yours. ( at a reasonable price)
Prolly Is not a word
|