Posts: 140
Threads: 17
Joined: Nov 2008
Reputation:
0
11-10-2008, 07:35 PM
(This post was last modified: 11-10-2008, 07:36 PM by shadowzx3.)
Ok so its almost 4:30am, I woke up randomly to some stupid noise and had an odd thought.
I don't really have much experience with cars as of yet, my pool of knowledge is growing though and being mechanically inclined helps drastically. I just bought my 2001 black zx3 a month ago. The engine in there now has about 159,000km on it. Still runs really well for a 7, almost 8 year old car though.
I'm currently looking for someone that owns a shop and loves working on cars to help spread some knowledge. I'm going through university, don't really have money for tools and if I would ever like to put a dime into upgrading the car, definitely need somewhere to work on it.
Once that is all taken care of, instead of bolt-ons and different upgrades. My dream has always been and if possible, my plan, is instead of rebuilding the engine I currently have, taking away a car to drive for a bit, would be to slowly save up every dime and penny I can and build myself a new engine. So I'm talking from ground up, so either finding a used zetec 2.0L from somewhere and getting maybe the displacement up, increase the flow or building one from the ground up. Forged internals would be a must because when my car would be complete, turbo or supercharged is definitely in the plans. When it comes to something like this, I would rather be a little tighter on money and a car that can take the stress then going cheap on parts that can ruin the whole point after it all.
Is this something that slowly could be afforded, given that I slowly buy stuff as I can afford such? I realize this maybe completely out of the question and would at the very least love to discuss pros/cons and the whole process for even education purposes at the very least.
I just feel it would be pointless to put money into upgrades for an engine that's getting older and older and maybe a brand new engine may be long-term the better route to go. My thinking is the more upgrades I slap on the car without attending to the motor, the older the motor gets, the more stress its going to have to put up with and well, I can't have it dying on me anytime soon.
At some point in its life, its going to see a track, maybe not next summer but maybe after that for sure.
Would love some input from you everyone here because if you don't ask, you'll never know.
'01 Black Focus ZX3
Custom FI Built 2.2L Zetec // CM Clutch and Lightweight Flywheel // X3 Tune FSWERKS// Ford SVT Brake Kit F&R// KW Springs // KYB AGX Shocks // 22 & 25mm Eibach Sway Set // 2000 Ported IM // FC TB // SVT Header // 3" Custom Header-back Exhaust //many more mods to come...
Posts: 4,037
Threads: 305
Joined: Jun 2003
Reputation:
9
11-10-2008, 08:08 PM
(This post was last modified: 11-10-2008, 08:09 PM by hardk0re.)
Welcome to the site :)
Me personally would just slap a turbo onto that engine. Engines for these cars are cheap. I think doing a complete built motor in these cars is going to set you back at least 7g's to do it right.
On a stock motor you can run 200whp ad not have an issue until your deep into the 200k's on the engine. And after that(or before), a used engine is only $250-400.
Thats just my 2 cents.
Posts: 4,124
Threads: 162
Joined: Mar 2005
Reputation:
2
hardk0re,Nov 10 2008, 06:08 AM Wrote:Welcome to the site :)
Me personally would just slap a turbo onto that engine. Engines for these cars are cheap. I think doing a complete built motor in these cars is going to set you back at least 7g's to do it right.
On a stock motor you can run 200whp ad not have an issue until your deep into the 200k's on the engine. And after that(or before), a used engine is only $250-400.
Thats just my 2 cents.
[right][snapback]276178[/snapback][/right]
Take this man's words to heart.
Once you go boost, you don't want to go back.
Sold: 2001 SE 2.0L SPI w/60mm TB, Steeda Shorty Intake.
Active: 2007 SES Hatch, Motegi MR7 Rims with 215/45ZR17 Michelin Pilot Super Sport Tires, debadged, black painted calipers and drums, RS Knob, CFM Short Throw, Billet E-Brake, CFM Focus pedals, MBRP Exhaust, XCal2, FS Front and Rear Strut Tower Bars, Diamond Plate Floor Mats and Sills, Alpine MP3 Deck, Alpine V-Power 300w Amp, Pioneer IMPP Sub, AlpineType-S door speakers, VF Engineering Rear Motor Mount, F2 RS Spoiler, Tokico D-spec shocks, HTP Cross Brace, EBC Rotors, Hawk HPS Pads, Russell SS Brake Lines, RS Wheel, SVT Blue Seats, Vibrant 2.5" Race Highflow Cat, CFM UDP. Rear SVT bumper to come.
Active: 2005 Jeep Wrangler Unlimited TJ [LJ], Volant CAI, 32" BFG Mud Terrains, and a whole bunch of goodies.
Posts: 5,027
Threads: 313
Joined: May 2003
Reputation:
21
shadowzx3,Nov 10 2008, 05:35 AM Wrote:Ok so its almost 4:30am, I woke up randomly to some stupid noise and had an odd thought.
I don't really have much experience with cars as of yet, my pool of knowledge is growing though and being mechanically inclined helps drastically. I just bought my 2001 black zx3 a month ago. The engine in there now has about 159,000km on it. Still runs really well for a 7, almost 8 year old car though.
I'm currently looking for someone that owns a shop and loves working on cars to help spread some knowledge. I'm going through university, don't really have money for tools and if I would ever like to put a dime into upgrading the car, definitely need somewhere to work on it.
Once that is all taken care of, instead of bolt-ons and different upgrades. My dream has always been and if possible, my plan, is instead of rebuilding the engine I currently have, taking away a car to drive for a bit, would be to slowly save up every dime and penny I can and build myself a new engine. So I'm talking from ground up, so either finding a used zetec 2.0L from somewhere and getting maybe the displacement up, increase the flow or building one from the ground up. Forged internals would be a must because when my car would be complete, turbo or supercharged is definitely in the plans. When it comes to something like this, I would rather be a little tighter on money and a car that can take the stress then going cheap on parts that can ruin the whole point after it all.
Is this something that slowly could be afforded, given that I slowly buy stuff as I can afford such? I realize this maybe completely out of the question and would at the very least love to discuss pros/cons and the whole process for even education purposes at the very least.
I just feel it would be pointless to put money into upgrades for an engine that's getting older and older and maybe a brand new engine may be long-term the better route to go. My thinking is the more upgrades I slap on the car without attending to the motor, the older the motor gets, the more stress its going to have to put up with and well, I can't have it dying on me anytime soon.
At some point in its life, its going to see a track, maybe not next summer but maybe after that for sure.
Would love some input from you everyone here because if you don't ask, you'll never know.
[right][snapback]276177[/snapback][/right]
Two things you can do almost right away (while saving pennies for the FI) is upgrade the brakes and suspension ... relatively inexpensive and typically DIY and you get immediate enjoyment every day of the year ... not to mention that these are sigifnicant wear items that need to be replaced regularly anyway.
2008 Fusion SEL MTX - DD1 * 2009 Fusion SEL - DD2 * 2007 Focus ZXW - R*I*P * 2004 Focus ZTW CD Silver - sold * 2004 Focus ZTW Black - sold * 2003 Focus ZTW Black - sold * 2001 Focus ZTW Gold - sold * 2000 Focus SE Wagon (ZTW option) - Black - sold * 2000 Focus SE Wagon (ZTW option) - Gold R*I*P
2003 Focus ZX5 infra-red Track Rat - R*I*P
2003 ZX5 CD Silver Track Rat - retired, but still in the driveway
New track rat: 2000 ZX3, Atlantic Blue * JRSC with lots more to come
* New Zetec crate motor - NFG - thanks Topspeed *
Posts: 9,588
Threads: 529
Joined: Mar 2004
Reputation:
1
11-11-2008, 12:39 AM
(This post was last modified: 11-11-2008, 12:40 AM by NOS2Go4Me.)
Better yet, build an entire motor for boost and then boost it. You'll see upwards of 300WHP with the right internals and turbo/intercooler combo and with a LSD and a brake upgrade it will be a killer ride.
So, in the meantime a good upgrade parts set is an upgraded suspension, lightweight rims, good sticky rubber, a big brake kit, maybe some HIDs, sport seats, an X-Cal2 or 3 and then buy the new shortblock and get to it.
http://www.focussport.com has one of the best all-inclusive setups for any Focus out there as far as forced induction goes.
EDIT - don't forget your winter tires if you're driving during the span between November and April :P
Daily driver 1: 2007 Jeep Wrangler Unlimited Sport "S"
33" BFG Mud-Terrain KM2s, lots of Rough Country gear - bumper, 2.5" lift, swaybar disconnects, Superwinch 10,000lb winch, Detroit Locker in rear D44 axle, custom exhaust, K+N filtercharger, Superchips-tuned.
Daily driver 2: 2006 Subaru Legacy GT
COBB Stage 1+ package - AccessPort tuner, COBB intake and airbox. Stage 2 coming shortly - COBB 3" AT stainless DP and race cat, custom 3" Magnaflow-based exhaust and Stage 2 COBB tune.
Posts: 4,281
Threads: 383
Joined: Oct 2005
Reputation:
2
If you want a built motor I'll let mine go for $3500 Completly Evrything upgraded except for the valve springs which are fine with reving up to 7000 let me know if your interested in the details. and hardcore is right you will spend upwards of $7000 for everything.
DruZX3 You Tube Page
My Rides on Car Domain
2001 Ford Focus ZX3 - Daily Driver
2008 Lincoln MKX Limited Edition - Grocery Getter
2007 Suzuki GSXR 600 - Rode and Sold
2004 Jeep Liberty Renegade - Offroaded and Sold
2008 Jeep Wrangler Unlimited X - R.I.P. Electrical Fire
2000 Ford Focus ZX3 - Traded in Now DrunkinMonkeys Car
2003 Ford Taurus Wagon - Inherited Drove and Sold
2000 Ford Focus ZX3 Turbo - Award Winning 336 WHP - Parted and Scraped
1990 Ford Festiva - My 1st Car
Posts: 7,314
Threads: 381
Joined: Apr 2006
Reputation:
0
yeah save up and buy ZX3_2NV's engine.....his is bulletproof
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Posts: 4,281
Threads: 383
Joined: Oct 2005
Reputation:
2
to bad I can't say the same for the tranny.
DruZX3 You Tube Page
My Rides on Car Domain
2001 Ford Focus ZX3 - Daily Driver
2008 Lincoln MKX Limited Edition - Grocery Getter
2007 Suzuki GSXR 600 - Rode and Sold
2004 Jeep Liberty Renegade - Offroaded and Sold
2008 Jeep Wrangler Unlimited X - R.I.P. Electrical Fire
2000 Ford Focus ZX3 - Traded in Now DrunkinMonkeys Car
2003 Ford Taurus Wagon - Inherited Drove and Sold
2000 Ford Focus ZX3 Turbo - Award Winning 336 WHP - Parted and Scraped
1990 Ford Festiva - My 1st Car
Posts: 1,068
Threads: 35
Joined: Apr 2007
Reputation:
0
NikiterZTS,Nov 10 2008, 02:23 PM Wrote:yeah save up and buy ZX3_2NV's engine.....his is bulletproof
[right][snapback]276206[/snapback][/right]
+1 to that. and get a lentech tranny! lol
Little bit of show, little bit of go.
Posts: 642
Threads: 54
Joined: Oct 2008
Reputation:
1
11-15-2008, 12:05 PM
(This post was last modified: 11-19-2008, 11:15 AM by fatphocus.)
ZX3_2NV,Nov 10 2008, 12:42 PM Wrote:If you want a built motor I'll let mine go for $3500 Completly Evrything upgraded except for the valve springs which are fine with reving up to 7000 let me know if your interested in the details. and hardcore is right you will spend upwards of $7000 for everything.
[right][snapback]276194[/snapback][/right]
entire motor with turbo kit and all for 3500? :o
Sean- 1998.5 Black/Blue CSVT #5906
Posts: 4,281
Threads: 383
Joined: Oct 2005
Reputation:
2
Who said anything about the turbo kit, you want that your looking at atleast another $3500. Or just buy the car as is for $8000
DruZX3 You Tube Page
My Rides on Car Domain
2001 Ford Focus ZX3 - Daily Driver
2008 Lincoln MKX Limited Edition - Grocery Getter
2007 Suzuki GSXR 600 - Rode and Sold
2004 Jeep Liberty Renegade - Offroaded and Sold
2008 Jeep Wrangler Unlimited X - R.I.P. Electrical Fire
2000 Ford Focus ZX3 - Traded in Now DrunkinMonkeys Car
2003 Ford Taurus Wagon - Inherited Drove and Sold
2000 Ford Focus ZX3 Turbo - Award Winning 336 WHP - Parted and Scraped
1990 Ford Festiva - My 1st Car
Posts: 140
Threads: 17
Joined: Nov 2008
Reputation:
0
haha thats obviously all WAYYYYY out of my budget right now.
I've got quite a few things that need to be done before looking into bolt-ons. Just little things but I feel sway bars would be a nice addition to it. After that, who knows, one thing at a time is what i've been told :P
'01 Black Focus ZX3
Custom FI Built 2.2L Zetec // CM Clutch and Lightweight Flywheel // X3 Tune FSWERKS// Ford SVT Brake Kit F&R// KW Springs // KYB AGX Shocks // 22 & 25mm Eibach Sway Set // 2000 Ported IM // FC TB // SVT Header // 3" Custom Header-back Exhaust //many more mods to come...
Posts: 7,314
Threads: 381
Joined: Apr 2006
Reputation:
0
ill be taking off my KYB AGX' struts & KW springs....get these along with swaybars and you'll be on rails like no other
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Posts: 2,014
Threads: 193
Joined: Sep 2003
Reputation:
0
Get a complete/matched suspension, rims and tires, and go and embarass much more expensive cars on twisty roads, or highspeed corners on the highways. You'll do this all day long, even with a relatively mild suspension...
Bleeding Ford Blue again...
|