[drunkinmonkey]

few quick picks of the inake and tb on courtesy of andrew (thanks agian)




just a quick pic...cant wait to send the block out to get bored and blasted and repainted

[ZX3_2NV]

Coming together very nicely I must say I actually like the Blue and purple combo.
I was always a hater on the stock manifold "with Turbo adaptor" where the cat would be located. But if your actually gonna chop the header and add a collector ( Vibrant makes one and there local) I think it just might work. But like I told you yesturday be aware of you oil lines cause with that style header it might sit lower than the oil pan and then you might need an external oil pump. Personally I always liked top mount turbo headers. If your planning to enter car shows you'll get pple kicking your front bumper trying to look deep into your engine bay looking for the turbo. Something I had to deal with when I had my precision turbo kit cause pple didn't think it was really boosted lol see what I mean


Compared to this Roush Manifold There is no question that its boosted. Just a thought to keep in the back of your head.

[drunkinmonkey]

yea i need a manifold with no wastegate flange i have internal wastegate

[drunkinmonkey]

hey guys trying to order siemens deka 60lb injectors but we cant find a part number



anybody know the part number for them

also apprently there ordering e a an edelbrock 255lph turbo fuel pump its got bigger ports on it apparently so why not



but yea really need a part number for the injectors



thnaks

[ZX3_2NV]

Ahh I see your dilema, But the internal wastgate makes an awsome noise if it's anything like my gt 28r.

As for the injectors I have a set of them on hold for Tony apperently the siemens injectors were available thru Ford at one time I can see if they have a number on them. But I also have 760 CC brand new injectors for sale in my thread and I just dropped the price to $250


As for the fuel pump sounds awsome, will you be running a return system? The BDL Fuel rail is capeable of that.

[drunkinmonkey]

just ordere siemens deka 60# injectors $128.53
and a 180 degree t-stat

not much more really to order:D

[ZX3_2NV]

Thats a decent price u sure your getting all 4 lol

[drunkinmonkey]

ZX3_2NV,Jan 20 2010, 09:26 AM Wrote:Thats a decent price u sure your getting all 4 lol
[right][snapback]299855[/snapback][/right]

haha sure am

[drunkinmonkey]

so went to steeda today and got some parts..was talking to pat and he highly recommend i get the AEM truboost boost controller...can anybody ever used this one before iv head good and bad about it

[ZX3_2NV]

waste of money unless ur planning to mess around with your boost settings and way over priced but if u do need anything from AEM http://www.garage16.ca can get it for you the cheapest as AEM is one of his sponsors.

[hardk0re]

yeah I never really understood the need for boost controllers, set your boost tune it and keep it set.

The only thing possibly is if you've got a winter you may want to change boost with driving conditions but then again just don't plant your foot to the floor.

[drunkinmonkey]

hardk0re,Jan 26 2010, 10:36 AM Wrote:yeah I never really understood the need for boost controllers, set your boost tune it and keep it set.

The only thing possibly is if you've got a winter you may want to change boost with driving conditions but then again just don't plant your foot to the floor.
[right][snapback]300183[/snapback][/right]

for you turbo guys where did you locate your cats....the trubo is gonna hang where the stock cat was just wanan know what you guys did to pass or emissions

[Oscar The Grouch]

drunkinmonkey,Jan 26 2010, 12:47 PM Wrote:

hardk0re,Jan 26 2010, 10:36 AM Wrote:yeah I never really understood the need for boost controllers, set your boost tune it and keep it set.

The only thing possibly is if you've got a winter you may want to change boost with driving conditions but then again just don't plant your foot to the floor.
[right][snapback]300183[/snapback][/right]

for you turbo guys where did you locate your cats....the trubo is gonna hang where the stock cat was just wanan know what you guys did to pass or emissions
[right][snapback]300187[/snapback][/right]

Emissions, what are emissions??? :lol:

Actually mine still retains the second cat underneath the car (which will soon be a high flow cat).

[ZX3_2NV]

Cats who needs cats, but if you must weld a high flow somewhere in the staright section under the car.

[drunkinmonkey]

ZX3_2NV,Jan 26 2010, 12:16 PM Wrote:Cats who needs cats, but if you must weld a high flow somewhere in the staright section under the car.
[right][snapback]300191[/snapback][/right]

thanks for the info
how are you guys passing emissions without cats with the new laws and such:S
id rathernot risk a ticket and possible inpoundment

[hardk0re]

I had a HF cat welded in a flexpipe, worked fine.

[NikiterZTS]

drunkinmonkey,Jan 26 2010, 11:47 AM Wrote:

hardk0re,Jan 26 2010, 10:36 AM Wrote:yeah I never really understood the need for boost controllers, set your boost tune it and keep it set.

The only thing possibly is if you've got a winter you may want to change boost with driving conditions but then again just don't plant your foot to the floor.
[right][snapback]300183[/snapback][/right]

for you turbo guys where did you locate your cats....the trubo is gonna hang where the stock cat was just wanan know what you guys did to pass or emissions
[right][snapback]300187[/snapback][/right]

I welded highflow cat right into 2.25" flex pipe....this way it doesn't matter if you're N/A or F/I
You can try the same thing.....I had photos somewhere, i'll post later.

[drunkinmonkey]

thanks guys pics would be awesome

[NikiterZTS]

drunkinmonkey,Jan 26 2010, 05:48 PM Wrote:thanks guys pics would be awesome
[right][snapback]300234[/snapback][/right]

Here you go

[drunkinmonkey]

NikiterZTS,Jan 26 2010, 07:07 PM Wrote:

drunkinmonkey,Jan 26 2010, 05:48 PM Wrote:thanks guys pics would be awesome
[right][snapback]300234[/snapback][/right]

Here you go

[right][snapback]300251[/snapback][/right]

is that a highflow for n svt that you used???