Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New job! and in need of safety harness
#1
Probably more for the tradesman here than the car guys, but dunno where to go. Other than you guys, I don't have all that many contacts in the GTA.

Anywho, I finally got a new job, and they're shipping me off to Nova Scotia & New Brunswick for a 4 month project. Ruins summer & fall for the most part, but have to jump at anything I can get. Plus dealing with sad wifey since I'll only be back every few weeks.

Just went over my "must have" tool list, and well, I need a safety harness & lanyard. I have no idea where to get one at a fair price. For kicks, I looked at home depot & rona, but I'm afraid of putting my life up against a $60-100 harness. (yeah, great, and i'm not a real big fan of heights, but I can deal with it). Need something that will be good, but not break the bank.

I have all this week off minus Friday to hunt around, so maybe I'll just make some calls. I can't find any safety type places nearby.

Leaving on the 26th too, so I really can't do any sort of mail-order until I get it 2-3 day or something.

Any ideas? Sparky maybe?
The new: 2013 Tangerine Scream ST
The old: 2005 ZX4 - MBRP 2.25", Marcy Motorsport CAI. SCT Tuning, Eibach Pro-System
--
Team PITA
Reply
#2
you can try here.....

http://www.safecouniforms.com/

not sure if he can get them, but i'm sure he'd try

it's my uncle, so tell him i sent you

Gord
2002 pitch black ZX3
__________________
Mach HIDs, 02 RS upper grille, Cervini's body kit, DTM drop mirrors, D2 coilovers, purple focussport strut tower bar and chrome rear bar, purple FC tb, Powerworks supercharger, optima yellow top, SVT ceramic coated header,Random Tech SVT/Zetec hi-flow cat , bosal flex, vibrant cat back with custom dual tips, b&m short throw shifter, pro-fit fuel door, shorty antenna, race-pedals.com "focus" pedals, clear 3rd brake light, SVT hvac controls, Transfer Racing billet hvac knobs, RS shift knob, RS Sparco E-brake handle, Mazda3 rear wiper, CarZone 3 piece roof wing, 17" Keskin KT4 wheels

Classic Painting
Reply
#3
Best places to hit are safety houses if you are in a rush.

http://www.acklandsgrainger.com
http://www.superiorsafety.ca
http://www.webersupply.com/
http://www.fastenal.com/web/home.ex

Look under the yellow pages for "Safety suppliers"
Sold:2001 SE 2.0L SPI w/60mm TB, Steeda Shorty Intake.

Active: 2007 SES Hatch, Motegi MR7 Rims with 215/45ZR17 Michelin Pilot Super Sport Tires, debadged, black painted calipers and drums, RS Knob, CFM Short Throw, Billet E-Brake, CFM Focus pedals, MBRP Exhaust, XCal2, FS Front and Rear Strut Tower Bars, Diamond Plate Floor Mats and Sills, Alpine MP3 Deck, Alpine V-Power 300w Amp, Pioneer IMPP Sub, AlpineType-S door speakers, VF Engineering Rear Motor Mount, F2 RS Spoiler, Tokico D-spec shocks, HTP Cross Brace, EBC Rotors, Hawk HPS Pads, Russell SS Brake Lines, RS Wheel, SVT Blue Seats, Vibrant 2.5" Race Highflow Cat, CFM UDP. Rear SVT bumper to come.

Active: 2005 Jeep Wrangler Unlimited TJ [LJ], Volant CAI, 32" BFG Mud Terrains, and a whole bunch of goodies. Big Grin
Reply
#4
So what's the job?
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Reply
#5
one job I had a few years ago when I was running fibre optical and telecommunications cables required me to wear safety harness. My work actually provided me with those no charge.
My other ride is your Mom
Reply
#6
you need to carry a cert. in your wallet and be trained in the use of wearing said device. IF M.O.L ask for your harness ticket and you can't produce then Wam' O they will fine u
[center]TEAM PITA™ Don't settle for a wannabe, only accept the real deal.[/center]
Reply
#7
(07-19-2010, 03:05 AM)torradan Wrote: Any ideas? Sparky maybe?

Sorry, man; I can't even if I wanted to. At Ford our harnesses are serial numbered and tracked -- to get a new one you have to turn the old one in -- not to mention that "A" if something were to happen to you and the ministry tracked the number it would eventually get back to me and I'd get fired for theft and "B" if you were to remove the number you could get fined by the ministry.

You can go here:

Safety Superstore

Mississauga / Oakville
3425 - 7 Laird Road
Mississauga, Ontario
L5L 5R8

Tel: 1-877-399-4438 (toll free)
Tel: (905) 828-7233

http://industrialsafetyplus.com/

I've dealt with them for hearing protection but they sell harnesses too. I think they start at $90 for a decent one.

If I could give you some advice, is

(1) make sure that you buy the same manufacturer harness and lanyard -- they're made to work together and there are cases where different manufacturers, because of differing design, that the lanyard and harness can actually SEPARATE(!) (called twist-out). They are designed as a SET so don't cheap out that way.

(2) if you are doing a lot of basket/picker work and you can afford it get a retractable lanyard; it's worth the money not to get yanked in the back when you forget you're tied off and run out of slack on a solid lanyard.

Good luck.

Edit: Added the website link
TEAM PITA: Don't settle for a wannabe, only accept the real deal.
*Magnetic Metallic 2015 Focus ST* *Red Candy Metallic 2012 F150 SuperCrew*
*Supercharged Roush Phase 2 Kona Blue 2012 Mustang GT*
Reply
#8
Any Nedco branch will have harnesses and lanyards.
http://www.nedco.ca/Ontario/home/Params/CultureCode/en
There's a branch at Denison/Woodbine, Front street downtown, Mississauga head office to off the top of my head. If the branch doesn't have it in stock, they'll get it next day or drop ship it to your site (if your on one right now).

Plus they have branches across Canada if you need anything else or warranty claim.

Are you able to write off the equipment on your taxes as tools? I would think so, and would try.
Reply
#9
Thanks guys! I'll start looking around and see what I can find.

Have the certs too.. have quite a few of them. Last thing I need is to get nailed with a stupid fine. Just hope I can remember all of everything!
The new: 2013 Tangerine Scream ST
The old: 2005 ZX4 - MBRP 2.25", Marcy Motorsport CAI. SCT Tuning, Eibach Pro-System
--
Team PITA
Reply
#10
To add a bit more info on sparky's suggestion. Get a shock absorbing lanyard (or one integrated with the harness). As well if you can, get a self-retracting lifeline (also known as a Sala Block). The good ones are made by Miller or Capital Safety (aka DBI Sala).
Sold:2001 SE 2.0L SPI w/60mm TB, Steeda Shorty Intake.

Active: 2007 SES Hatch, Motegi MR7 Rims with 215/45ZR17 Michelin Pilot Super Sport Tires, debadged, black painted calipers and drums, RS Knob, CFM Short Throw, Billet E-Brake, CFM Focus pedals, MBRP Exhaust, XCal2, FS Front and Rear Strut Tower Bars, Diamond Plate Floor Mats and Sills, Alpine MP3 Deck, Alpine V-Power 300w Amp, Pioneer IMPP Sub, AlpineType-S door speakers, VF Engineering Rear Motor Mount, F2 RS Spoiler, Tokico D-spec shocks, HTP Cross Brace, EBC Rotors, Hawk HPS Pads, Russell SS Brake Lines, RS Wheel, SVT Blue Seats, Vibrant 2.5" Race Highflow Cat, CFM UDP. Rear SVT bumper to come.

Active: 2005 Jeep Wrangler Unlimited TJ [LJ], Volant CAI, 32" BFG Mud Terrains, and a whole bunch of goodies. Big Grin
Reply
#11
oh Nik, going to be doing network cabling installs for a grocery store chain out that way. Hoping after this i can get something a little closer to home. But have to take what I can to get my foot in the door.
The new: 2013 Tangerine Scream ST
The old: 2005 ZX4 - MBRP 2.25", Marcy Motorsport CAI. SCT Tuning, Eibach Pro-System
--
Team PITA
Reply
#12
Also as Sparky said I do fiber optic runs and some electrical cabling at nuke plants here and there....and for us as well to get new harness we have to return the old one or we have to feel out paper work and get it signed by site manager that the item is lost. PITA.

Good luck with your new job. I spend quit some time away from home....today I arrived to the site and I'll be here for 5 straight weeks with only Saturdays off. I recomend to find yourself a good after work bar.
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Reply
#13
Thanks for all the help guys. Went out yesterday and picked up my gear.

Now to see about the good after-work bar when I get to wherever I'm going.
The new: 2013 Tangerine Scream ST
The old: 2005 ZX4 - MBRP 2.25", Marcy Motorsport CAI. SCT Tuning, Eibach Pro-System
--
Team PITA
Reply
#14
(07-21-2010, 09:20 PM)torradan Wrote: Thanks for all the help guys. Went out yesterday and picked up my gear.

Now to see about the good after-work bar when I get to wherever I'm going.

It's the Maritimes - no shortage of good bars there. Good luck Todd with the new job and the travels.
2008 Fusion SEL MTX - DD1 * 2009 Fusion SEL - DD2 * 2007 Focus ZXW - R*I*P * 2004 Focus ZTW CD Silver - sold * 2004 Focus ZTW Black - sold * 2003 Focus ZTW Black - sold * 2001 Focus ZTW Gold - sold * 2000 Focus SE Wagon (ZTW option) - Black - sold * 2000 Focus SE Wagon (ZTW option) - Gold R*I*P

2003 Focus ZX5 infra-red Track Rat - R*I*P
2003 ZX5 CD Silver Track Rat - retired, but still in the driveway


New track rat: 2000 ZX3, Atlantic Blue * JRSC with lots more to come

* New Zetec crate motor - NFG - thanks Topspeed *
Reply
#15
It's my understand, which could be totally wrong, that the employer HAS to proved the safety harness and lanyard. And if you were to wear your own equipment, you would not be covered. My employer was told they have to provide us with retractable lanyards, because if you take the length of our lanyards, the shift in the harness, the stretch in the lanyard deploying, etc... it's useless at 16'. Also be careful how you wear it, as guys have had their testicles pop out of the skin if not adjusted correctly. ...sometimes falling to your death doesn't sound so bad!

For the last year have been building a $24+ million dollar sewage treatment facility. Getting $15 something / hour.
Reply
#16
I picked up my harness and lanyard from Fastenal. Best of luck with the new job!
'14 Escape 2.0t
2012 5dr Ti : Traded
Reply
#17
Ya your employer should provide you with the Harness...Good luck with the new job Spide-man
E.O Masiv!
New look for the summer
SVT ZX5 Focus Build#56 01/29/2003
I think there is something wrong with my car, every time I shift I hear Psssst noise?
Looking to get 25-30psi with a Procharger


[Image: style7,TikEtZ.png]
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)