Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Where Should I Go From Here?
#1
I'm just about done appearance mods on the outside and the ICE is kinda where I want to be for now, but I wouldn't mind doing some more performance stuff. I was thinking about doing the following soon:

1. SPI Screamin' Demon Coil and Livewires or Focussport replacement wires (with NGK Iridium plugs)

2. Magnaflow Hi-Flow Cat and an SPI Shorty header (if I can bloody find one)

3. 50% UDP from escortfocus.com

4. Upgraded suspension package (probably Eibach)

5. Upgraded Cam and SPI Cam adjusting sprocket

Arg, now before anyone says "TURBO", no I'm not going that way since I have an autotragic. Plus I'm saving cash for a house/truck/mustang :rolleyes: .

Anywho, what do you guys think I should hit next? :unsure: Any other reasonable/feasable recommendations welcome. (selling the car and getting a ZTEC or SVT is not reasonable :D )
Sold:2001 SE 2.0L SPI w/60mm TB, Steeda Shorty Intake.

Active: 2007 SES Hatch, Motegi MR7 Rims with 215/45ZR17 Michelin Pilot Super Sport Tires, debadged, black painted calipers and drums, RS Knob, CFM Short Throw, Billet E-Brake, CFM Focus pedals, MBRP Exhaust, XCal2, FS Front and Rear Strut Tower Bars, Diamond Plate Floor Mats and Sills, Alpine MP3 Deck, Alpine V-Power 300w Amp, Pioneer IMPP Sub, AlpineType-S door speakers, VF Engineering Rear Motor Mount, F2 RS Spoiler, Tokico D-spec shocks, HTP Cross Brace, EBC Rotors, Hawk HPS Pads, Russell SS Brake Lines, RS Wheel, SVT Blue Seats, Vibrant 2.5" Race Highflow Cat, CFM UDP. Rear SVT bumper to come.

Active: 2005 Jeep Wrangler Unlimited TJ [LJ], Volant CAI, 32" BFG Mud Terrains, and a whole bunch of goodies. Big Grin
Reply
#2
suspension, definitely suspension
'02 CD Silver SVT
All the options
#3731 out of 4788

'85 Mustang GT
Reply
#3
The deamon coil is a waste of money, your plug wires/coil are fine, your really going to love the look and feeling of the suspension, also a UDP on your engine is a nice cheap mod that will free up some HP, not sure how much gain your going to get from a header, especially a shorty header.....


Maybe a cam, id be interested to see what it does for the SPI.... :)
Reply
#4
*smack*

This is why you come visit. With coffee.

UDP for sure. It makes the most sense - it's the cheapest 10 BHP you can "bolt-on" to the SPI. Make sure you get the smaller belt.

Cam is a nice idea, and the medium cam from EF.com looks good. The downside is the overall cost, as they recommend that you get the new lifters, springs, seals and retainers. At that point, you'd pretty much need a re-flash and a couple of dyno pulls to get the tune right before you hit the road again. My reservation with that is that there's no-one around that I'd trust with that level of tuning... save Steeda - and they're not that familiar with SPIs. Just calling it as I see it.

The only SPI shorty header available has a messed firing order. You're better off with a header from a 89-91 Escort GT with a few tweaks. The Magnaflow hi-flow cat is a better idea.. a few extra horses, but beware as there's the possibility of a rice shower from the noise.

Suspension's a smart upgrade, and I'm still leaning towards the SVT retrofit. Again, with a full install you'll need extra work (4-wheel alignment) and that's extra cost. If the car's lower, you're going to want a shop that will align it right. So far, Anthony has found one of the only places specializing in lowered cars that I've seen.

Coil / wires - I still say nah. Only after everything else is done to the motor, because the factory replacement 8mms are great from what I can tell. I'd go NGK Iridiums and 8mm replacements.

Daily driver 1: 2007 Jeep Wrangler Unlimited Sport "S"

33" BFG Mud-Terrain KM2s, lots of Rough Country gear - bumper, 2.5" lift, swaybar disconnects, Superwinch 10,000lb winch, Detroit Locker in rear D44 axle, custom exhaust, K+N filtercharger, Superchips-tuned.

Daily driver 2: 2006 Subaru Legacy GT

COBB Stage 1+ package - AccessPort tuner, COBB intake and airbox. Stage 2 coming shortly - COBB 3" AT stainless DP and race cat, custom 3" Magnaflow-based exhaust and Stage 2 COBB tune.
Reply
#5
NOS2Go4Me,Jul 21 2005, 10:16 AM Wrote:*smack*
[right][snapback]124096[/snapback][/right]

:wtf: :angry:

That does it you're sooo getting an atomic wedgie. :lol:
Sold:2001 SE 2.0L SPI w/60mm TB, Steeda Shorty Intake.

Active: 2007 SES Hatch, Motegi MR7 Rims with 215/45ZR17 Michelin Pilot Super Sport Tires, debadged, black painted calipers and drums, RS Knob, CFM Short Throw, Billet E-Brake, CFM Focus pedals, MBRP Exhaust, XCal2, FS Front and Rear Strut Tower Bars, Diamond Plate Floor Mats and Sills, Alpine MP3 Deck, Alpine V-Power 300w Amp, Pioneer IMPP Sub, AlpineType-S door speakers, VF Engineering Rear Motor Mount, F2 RS Spoiler, Tokico D-spec shocks, HTP Cross Brace, EBC Rotors, Hawk HPS Pads, Russell SS Brake Lines, RS Wheel, SVT Blue Seats, Vibrant 2.5" Race Highflow Cat, CFM UDP. Rear SVT bumper to come.

Active: 2005 Jeep Wrangler Unlimited TJ [LJ], Volant CAI, 32" BFG Mud Terrains, and a whole bunch of goodies. Big Grin
Reply
#6
After all is said and done i'd get a tune, but you've pretty much mentioned every bolt on...But just a word of warning, i've heard from various focus owners that our autotragics like to choke and die at 145+ wtq. Its just something to keep in mind.
Reply
#7
Suspension.

I love mine.
Reply
#8
Best advice I can give. Keep your money in the bank. Keep it away from the depleting Focus value.
TEAM PITA Don't settle for a wannabe, only accept the real deal.

One day I will rule the world. For now, I have to settle for this place.
Reply
#9
meford4u,Jul 21 2005, 02:50 PM Wrote:Best advice I can give.  Keep your money in the bank.  Keep it away from the depleting Focus value.
[right][snapback]124222[/snapback][/right]

Or buy a house :D
Daily driver 1: 2007 Jeep Wrangler Unlimited Sport "S"

33" BFG Mud-Terrain KM2s, lots of Rough Country gear - bumper, 2.5" lift, swaybar disconnects, Superwinch 10,000lb winch, Detroit Locker in rear D44 axle, custom exhaust, K+N filtercharger, Superchips-tuned.

Daily driver 2: 2006 Subaru Legacy GT

COBB Stage 1+ package - AccessPort tuner, COBB intake and airbox. Stage 2 coming shortly - COBB 3" AT stainless DP and race cat, custom 3" Magnaflow-based exhaust and Stage 2 COBB tune.
Reply
#10
meford4u,Jul 21 2005, 10:50 AM Wrote:Best advice I can give.  Keep your money in the bank.  Keep it away from the depleting Focus value.
[right][snapback]124222[/snapback][/right]

this is always the smartest option when modding the SPI! ;)

seriously though, you'll notice more from a nice suspension and quality tires than you will from everything else combind.

shorty headers are not a good option on any focus! get a race header and weld a high flow cat into the exhaust just after the flex. this will sound better than a shorty and highflow and make more and better power!
the UDP along with the cam and cam gear are good ideas but that is a LOT of work for little gain.

after all that, a chip is pretty much your last option.
FS has done quiet a bit of work with SPI's as has McNews....

wires are a waste unless your current wires are shot, then replace them with basic wires like the FS ones.
a coil is an absolute waste of money, you will see little to no gain in anything from a coil on the focus. you'd get about the same gains as you would from some "typeR-GTR" decals. :rolleyes:

seriously, go with the suspension and tires, you will enjoy the car far more as the engine and tranny will mask mosat of the gains from the poweradders.
Reply
#11
zetec engine.

found one for $650 new, sans tranny
[Image: ncclogo.jpg]
Reply
#12
suspension... or that zetec motor flo is talking about...

actually do

UDP and SVT suspension...
05 Altima SE-R
98 Grand Cherokee 5.9: Flowmaster; K&N
05 300C 5.7: Sold
99 Civic SIR: Sold
03 Focus SVT: Sold
01 Focus ZX3: Sold
Reply
#13
The UDP is one of the biggest single-gain boltons for the SPI. After that you can port-match the intake to the new 60mm BDR TB, and maybe PnP the head.

For biggest overall gains, Crane Stage 2 or higher cam with complete kit, UDP, TB (you have it already), PnP and port-matched intake-to-TB, and high-flow cat. Add some sort of SCT tune on that with 91-94 octane and you're hauling ass.

The Zetec drop-in would be a good idea, as power-adders for that are a dime a dozen, but beware the dreaded oil seep from the valve cover, and the fact you're going to want the FRPP transmission valve body upgrade almost immediately.
Daily driver 1: 2007 Jeep Wrangler Unlimited Sport "S"

33" BFG Mud-Terrain KM2s, lots of Rough Country gear - bumper, 2.5" lift, swaybar disconnects, Superwinch 10,000lb winch, Detroit Locker in rear D44 axle, custom exhaust, K+N filtercharger, Superchips-tuned.

Daily driver 2: 2006 Subaru Legacy GT

COBB Stage 1+ package - AccessPort tuner, COBB intake and airbox. Stage 2 coming shortly - COBB 3" AT stainless DP and race cat, custom 3" Magnaflow-based exhaust and Stage 2 COBB tune.
Reply
#14
svt motor swap?
Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)