Posts: 2,584
Threads: 108
Joined: May 2003
Reputation:
0
so some of you may remmber my run in with a median and my tire exploding and my sterring being messed.
So i got my new tires put on, and pulling out felt all good, sterring was still lop-sided, i was in a hurry and didnt get an alignment, i hope thats all it needs.
But anyways,
when i get to about 70km/hr and over i feel this slight vibrating in the back part of my seat on the drivers side of it, (closest to the door) and the wheel shakes a little...
bent rim? or could it be something else? The one rim i was thinking might be bent would be the one thats on the back drivers side, it was on the front drivers side before i got the tires on.
I wish my grass was Emo, so it would cut itself...
Posts: 2,750
Threads: 335
Joined: Nov 2003
Reputation:
0
i would put the stock rims back on and see if it go away. If yes it does then your rim could be bent.
Posts: 8,622
Threads: 898
Joined: May 2003
Reputation:
6
bad alignment, bent wheel, missing wheel weights, and warped rotors will contribute to vibration and steering wheel shake. Just start at the beginning of that list, and work through it until you find what's causing it.
Contribute to focuscanada.net's future!Donations of $20 and over get a custom title!
Posts: 1,127
Threads: 98
Joined: Apr 2005
Reputation:
0
08-17-2005, 03:38 AM
(This post was last modified: 08-17-2005, 03:46 AM by Mason.)
Sounds like the rim could be bend. Put it in nutral and hang your self out the door some where safe, where there is no traffic. MAKE SURE the rim isnt rotating retarted or wabbaling around.
2000 ZX3
Posts: 9,627
Threads: 938
Joined: May 2003
Reputation:
0
Mason,Aug 16 2005, 01:38 PM Wrote:Sounds like the rim could be bend. Put it in nutral and hand your self out the door some where safe where there is no traffic. MAKE SURE the rim isnt rotating retarted or wabbaling around.
[right][snapback]133145[/snapback][/right]
Posts: 1,127
Threads: 98
Joined: Apr 2005
Reputation:
0
Yup. Thats what happens when your speaking with some one on the phone, Typing what there saying, and trying to type on here at the same time.
But either way. From reading how you hit the curb before I think your rim is probibly bent.
2000 ZX3
Posts: 675
Threads: 33
Joined: May 2003
Reputation:
0
have you tried turning on the seat warmer? Always makes my shakes go away :P :lol:
2004 SVT 3Dr
STKVSTDA
Posts: 675
Threads: 33
Joined: May 2003
Reputation:
0
^^ sorry about that *shakes head*... somedays, work is no good for the brain... :huh:
2004 SVT 3Dr
STKVSTDA
Posts: 2,584
Threads: 108
Joined: May 2003
Reputation:
0
i would throw on the stockers, but i dont have any haha
Steve, thats good list and ill try that...if it is bent, i think its gonna cost me about 150 bucks to re-shape it, which is balls.
I only really start to notice it at higher speeds...ill strat with the alignment and see how it goes.
I wish my grass was Emo, so it would cut itself...
Posts: 2,750
Threads: 335
Joined: Nov 2003
Reputation:
0
If it only happens at higher speeds most likely out of alignment or missing a weight.
Posts: 2,584
Threads: 108
Joined: May 2003
Reputation:
0
well i dont know if it ONLY happens at high speed, but thats when i start to notice it...
I wish my grass was Emo, so it would cut itself...
Posts: 2,129
Threads: 77
Joined: Aug 2004
Reputation:
0
Mason,Aug 16 2005, 05:38 PM Wrote:Sounds like the rim could be bend. Put it in nutral and hang your self out the door some where safe, where there is no traffic. MAKE SURE the rim isnt rotating retarted or wabbaling around.
[right][snapback]133145[/snapback][/right]
at what point did this ever seem to be a good idea to you? :D
***want to buy***
MBRP................ check
SCT Xcal2 ........ check
VF mounts
Adj. Dampers ... check
Meford's Mom.... sale pending
Posts: 8,622
Threads: 898
Joined: May 2003
Reputation:
6
Mason,Aug 16 2005, 01:38 PM Wrote:Sounds like the rim could be bend. Put it in nutral and hang your self out the door some where safe, where there is no traffic. MAKE SURE the rim isnt rotating retarted or wabbaling around.
[right][snapback]133145[/snapback][/right]
and sunroofs are for highway beerbongs?
there is nowhere safe to do this.. period.
This is almost as classic as giving your engine a port and polish by pouring sand in the oil.
Contribute to focuscanada.net's future!Donations of $20 and over get a custom title!
Posts: 2,584
Threads: 108
Joined: May 2003
Reputation:
0
darkpuppet,Aug 16 2005, 08:35 PM Wrote:Mason,Aug 16 2005, 01:38 PM Wrote:Sounds like the rim could be bend. Put it in nutral and hang your self out the door some where safe, where there is no traffic. MAKE SURE the rim isnt rotating retarted or wabbaling around.
[right][snapback]133145[/snapback][/right]
and sunroofs are for highway beerbongs?
there is nowhere safe to do this.. period.
This is almost as classic as giving your engine a port and polish by pouring sand in the oil.
[right][snapback]133200[/snapback][/right]
GENUIS!!!!!! why didnt i think of that earlier!!
I wish my grass was Emo, so it would cut itself...
Posts: 1,127
Threads: 98
Joined: Apr 2005
Reputation:
0
08-17-2005, 07:15 AM
(This post was last modified: 08-17-2005, 07:19 AM by Mason.)
Lol Well Ive never had this problem cause Ive never smashed a curb... Cant say Ive ever bent a rim.
And unless your Retarded and let your car roll away then its safe in every way.
2000 ZX3
Posts: 371
Threads: 29
Joined: Jul 2004
Reputation:
0
08-17-2005, 07:22 AM
(This post was last modified: 08-17-2005, 07:23 AM by SVTZX503.)
If you have a bent rim I know a good place here in S'toon to have it fixed.
Kelvin's Wheel ask for Chad #955-5552
2003 CD Silver SVT Focus
#21 of 2173
Posts: 2,584
Threads: 108
Joined: May 2003
Reputation:
0
SVTZX503,Aug 16 2005, 09:22 PM Wrote:If you have a bent rim I know a good place here in S'toon to have it fixed.
Kelvin's Wheel ask for Chad #955-5552
[right][snapback]133222[/snapback][/right]
nice, i think ill check them out, where are they located?
I wish my grass was Emo, so it would cut itself...
Posts: 7,019
Threads: 347
Joined: Apr 2004
Reputation:
6
FociPhil,Aug 16 2005, 05:29 PM Wrote:i feel this slight vibrating in the back part of my seat
[right][snapback]133135[/snapback][/right]
pull the gerbil out of your ass
TEAM PITA Don't settle for a wannabe, only accept the real deal.
One day I will rule the world. For now, I have to settle for this place.
Posts: 1,218
Threads: 103
Joined: Apr 2005
Reputation:
0
Mason,Aug 16 2005, 11:38 AM Wrote:Sounds like the rim could be bend. Put it in nutral and hang your self out the door some where safe, where there is no traffic. MAKE SURE the rim isnt rotating retarted or wabbaling around.
[right][snapback]133145[/snapback][/right]
Here's wat I think of when I read that
http://media.ebaumsworld.com/index.php?e...urfing.wmv
2005 Liquid Grey ZX3 RIP
http://members.cardomain.com/phantom66
Mods so far : Mazda 3 Wiper Arm, Shorty Antenna, Alpine CDA-9887 HU, 17" Enkei Evo6 Hyper Black Nexen N3000 215/45/17
2010 World Rally Blue Subaru Impreza WRX STi
Posts: 1,127
Threads: 98
Joined: Apr 2005
Reputation:
0
|