Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
The 2005 You've All Been Waiting For...
#1
Alright, the car arrived at my dealership today for mechanical work. I was so excited to learn it was coming, and then to see it for the first time since it was put together, it was awesome!

Since I've been promising for so long, here are the pics. There are still a few things to do, but the bodyshop is essentially done with my car. :D

Bodyshop thought it would be funny to put another Ford emblem in the grill, so I'm getting them to take that off once they take it back for the final detailing. :lol:

[Image: February14th002.jpg]

[Image: February14th006.jpg]

[Image: February14th013.jpg]

They decided to make custom gaskets for me, which would've been fine if they weren't an inch thick. I'm going to try and get them to make them a little more OEM:
[Image: February14th007.jpg]

[Image: February14th010.jpg]

4 months in the making, and still more work to do, yay!
Reply
#2
LOOKING GOOD!!!!!!!


E.O Masiv!
New look for the summer
SVT ZX5 Focus Build#56 01/29/2003
I think there is something wrong with my car, every time I shift I hear Psssst noise?
Looking to get 25-30psi with a Procharger


[Image: style7,TikEtZ.png]
Reply
#3
looks awesome kat, one of the best looking ZX5's i've seen.
'03 Focus SVT
Reply
#4
Looking incredible...
'14 Escape 2.0t
2012 5dr Ti : Traded
Reply
#5
Thats awesome looking.

Who makes the rims, they're really nice too.
Current
09 F150 SCREW 4X4 XTR

Former
Show
Hella Magic Module Tail Lights, 17" Ford Racing EAP rims, 5% Rear, 20% Front Tint, Panasonic CQ7401 Deck, 2 MB Quart 10's, Alpine Components, Phoenix Gold 500.1 Amp
Go
Steeda Cold Ram Air Intake MBRP Exhaust (Gen 2), FK Coilovers, Hedman Header (Install Pending),FC Hi-Flo Cat (Install Pending),EBC Greenstuff Pads

Reply
#6
habmann,Feb 14 2006, 09:04 PM Wrote:Who makes the rims, they're really nice too.
[right][snapback]170544[/snapback][/right]

They are made by Kazera. KZ-A is the model. :)
Reply
#7
I like what you've done cosmetically.

Now it's time for a turbo!
TEAM PITA Don't settle for a wannabe, only accept the real deal.

One day I will rule the world. For now, I have to settle for this place.
Reply
#8
Damn Sexy bodykit.
2005 Liquid Grey ZX3 RIP
http://members.cardomain.com/phantom66
Mods so far : Mazda 3 Wiper Arm, Shorty Antenna, Alpine CDA-9887 HU, 17" Enkei Evo6 Hyper Black Nexen N3000 215/45/17
2010 World Rally Blue Subaru Impreza WRX STi
Reply
#9
almost as nice as my 05 lol
looking good
E.O MASIV
Reply
#10
Nice...looks awesome..

Nice to see another 05' represent//
Reply
#11
Hood doesn't fit.


But it looks awesome overall.
Reply
#12
puuuuuurrrrrrty
Contribute to focuscanada.net's future!

Donations of $20 and over get a custom title!







Reply
#13
ANTHONYD,Feb 15 2006, 06:26 AM Wrote:Hood doesn't fit.


But it looks awesome overall.
[right][snapback]170571[/snapback][/right]

The hood is popped in those pictures, otherwise it fits as best as they can make it fit, which is pretty close to perfect! :)

Thanks for all the comments everyone. :)
Reply
#14
Not too shabby!

It's clean but modified, which is the best of all worlds in my books!

Now she needs a tad more snort!
Daily driver 1: 2007 Jeep Wrangler Unlimited Sport "S"

33" BFG Mud-Terrain KM2s, lots of Rough Country gear - bumper, 2.5" lift, swaybar disconnects, Superwinch 10,000lb winch, Detroit Locker in rear D44 axle, custom exhaust, K+N filtercharger, Superchips-tuned.

Daily driver 2: 2006 Subaru Legacy GT

COBB Stage 1+ package - AccessPort tuner, COBB intake and airbox. Stage 2 coming shortly - COBB 3" AT stainless DP and race cat, custom 3" Magnaflow-based exhaust and Stage 2 COBB tune.
Reply
#15
05-BLACK-ZX5,Feb 15 2006 Wrote:
ANTHONYD,Feb 15 2006, 06:26 AM Wrote:Hood doesn't fit.


But it looks awesome overall.
[right][snapback]170571[/snapback][/right]

The hood is popped in those pictures, otherwise it fits as best as they can make it fit, which is pretty close to perfect! :)

Thanks for all the comments everyone. :)
[right][snapback]170582[/snapback][/right]

i was gonna ask if the hood was popped, becuase thats a huge gap between the grille and hood front.

But that is seriously one nice phacking car. If i were to do an 05, it would look exactly like that, but i would have opt for the wide instead of the narrow, but thats just me.

What mechanical work is getting done?? Keep up the good work!
I wish my grass was Emo, so it would cut itself...
Reply
#16
that's gotta be the nicest bumper for any focus.. clean simple but agressive and not over stated.
***want to buy***
MBRP................ check
SCT Xcal2 ........ check
VF mounts
Adj. Dampers ... check
Meford's Mom.... sale pending
Reply
#17
FociPhil,Feb 15 2006, 09:08 AM Wrote:
05-BLACK-ZX5,Feb 15 2006 Wrote:
ANTHONYD,Feb 15 2006, 06:26 AM Wrote:Hood doesn't fit.


But it looks awesome overall.
[right][snapback]170571[/snapback][/right]

The hood is popped in those pictures, otherwise it fits as best as they can make it fit, which is pretty close to perfect! :)

Thanks for all the comments everyone. :)
[right][snapback]170582[/snapback][/right]

i was gonna ask if the hood was popped, becuase thats a huge gap between the grille and hood front.

But that is seriously one nice phacking car. If i were to do an 05, it would look exactly like that, but i would have opt for the wide instead of the narrow, but thats just me.

What mechanical work is getting done?? Keep up the good work!
[right][snapback]170598[/snapback][/right]

The car is trying to idle around 4000 - 5000 RPM still since the accident. That's lower than the 6000 RPM it shot up to upon impact. :lol:

I have a Focus-central 65mm throttle body, Roush short shfiter & knob, Ford Racing front & rear sway bars, and SVT pedal set waiting for install once I get it into my garage. :)
Reply
#18
looks good 05 black ZX5, although I don't personally car for the clear american corners in the signel spaces, why did you not use the euro ones ?
I was the only member on this board with a Yellow Focus Sedan, and a 2002+ Euro Facelift on a sedan.
Reply
#19
Frost__2001,Feb 15 2006, 01:52 PM Wrote:looks good 05 black ZX5, although I don't personally car for the clear american corners in the signel spaces, why did you not use the euro ones ?
[right][snapback]170688[/snapback][/right]

I was told the euro turn signal covers wouldn't work, so I ended up with these ones. I would've prefered the euro clears.
Reply
#20
that kit uses the NA signals...
I wish my grass was Emo, so it would cut itself...
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)