Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
More F-ing Audio Issues
#21
You clipped off the stock harness plug!!!! Thats bad...

Most audioshops will charge you even more now.
05 Altima SE-R
98 Grand Cherokee 5.9: Flowmaster; K&N
05 300C 5.7: Sold
99 Civic SIR: Sold
03 Focus SVT: Sold
01 Focus ZX3: Sold
#22
scoobasteve,Mar 21 2006, 12:54 PM Wrote:You clipped off the stock harness plug!!!! Thats bad...

Most audioshops will charge you even more now.
[right][snapback]176174[/snapback][/right]


NO NO NO .... The stock harness wasn't clipped.

The Focus adapter ( I guess is what it is...) is what wires are shortened.
#23
Well then unplug it from the car and solder the wires to the deck harness done and done.
2005 Liquid Grey ZX3 RIP
http://members.cardomain.com/phantom66
Mods so far : Mazda 3 Wiper Arm, Shorty Antenna, Alpine CDA-9887 HU, 17" Enkei Evo6 Hyper Black Nexen N3000 215/45/17
2010 World Rally Blue Subaru Impreza WRX STi
#24
Ya its always better to solder the connections. Just twisting wires together they will eventually loosen over time. Personally i'd use heat shrink tubing over the wire if you're gonna just twist them together. It won't loosen over time like electrical tape can. Just my personal preference.
Current
09 F150 SCREW 4X4 XTR

Former
Show
Hella Magic Module Tail Lights, 17" Ford Racing EAP rims, 5% Rear, 20% Front Tint, Panasonic CQ7401 Deck, 2 MB Quart 10's, Alpine Components, Phoenix Gold 500.1 Amp
Go
Steeda Cold Ram Air Intake MBRP Exhaust (Gen 2), FK Coilovers, Hedman Header (Install Pending),FC Hi-Flo Cat (Install Pending),EBC Greenstuff Pads

#25
ah, then just grab a new adapter from ct... its like $10... wire the deck to that.. and voila...
05 Altima SE-R
98 Grand Cherokee 5.9: Flowmaster; K&N
05 300C 5.7: Sold
99 Civic SIR: Sold
03 Focus SVT: Sold
01 Focus ZX3: Sold
#26
scoobasteve,Mar 21 2006, 01:41 PM Wrote:ah, then just grab a new adapter from ct... its like $10...  wire the deck to that.. and voila...
[right][snapback]176189[/snapback][/right]
that's the plan!
#27
Turns out it wasn't the harness. Although I rewired it, it was still cutting out when I reved the engine, went around corners, and hit bumps. Just for kicks I popped the hood and to my suprise / stupidity, the fuse holder was smashed and the fuse was hanging out.

A quick trip to the shop and 20 bux later we're louder than ever. I guess it was a win win situation, I got the harness re wired that I wanted to do, as well as replacing the fuse holder and tidying up all the wires behind the dash. I put wire coweling around the rca cables to make it easier to navigate behind there. I did a nice clean job if I do say so myself! :P

Cheers!.
a.
#28
Nice work, good to hear ya got it all solved.

Where did you mount the fuse holder now to prevent this from happening again?
'14 Escape 2.0t
2012 5dr Ti : Traded
#29
euro_zx5,Mar 27 2006, 10:14 AM Wrote:Nice work, good to hear ya got it all solved.

Where did you mount the fuse holder now to prevent this from happening again?
[right][snapback]177176[/snapback][/right]


I'm going to mount it to the metal brace that holds the windshield washer bottle.

I'll try to get to it this weekend.
#30
ANTHONYD,Mar 27 2006, 09:40 AM Wrote:
euro_zx5,Mar 27 2006, 10:14 AM Wrote:Nice work, good to hear ya got it all solved.

Where did you mount the fuse holder now to prevent this from happening again?
[right][snapback]177176[/snapback][/right]


I'm going to mount it to the metal brace that holds the windshield washer bottle.

I'll try to get to it this weekend.[right][snapback]177181[/snapback][/right]

In guelph?? whats that? your coming to guelph?
#31
microbunny,Mar 27 2006, 06:04 PM Wrote:
ANTHONYD,Mar 27 2006, 09:40 AM Wrote:
euro_zx5,Mar 27 2006, 10:14 AM Wrote:Nice work, good to hear ya got it all solved.

Where did you mount the fuse holder now to prevent this from happening again?
[right][snapback]177176[/snapback][/right]


I'm going to mount it to the metal brace that holds the windshield washer bottle.

I'll try to get to it this weekend.[right][snapback]177181[/snapback][/right]

In guelph?? whats that? your coming to guelph?
[right][snapback]177344[/snapback][/right]


Nobody wants to go to guelph :ph34r:

Brantford 4 Lyf3! :lol:
05 Altima SE-R
98 Grand Cherokee 5.9: Flowmaster; K&N
05 300C 5.7: Sold
99 Civic SIR: Sold
03 Focus SVT: Sold
01 Focus ZX3: Sold
#32
scoobasteve,Mar 27 2006, 06:29 PM Wrote:
microbunny,Mar 27 2006, 06:04 PM Wrote:
ANTHONYD,Mar 27 2006, 09:40 AM Wrote:
euro_zx5,Mar 27 2006, 10:14 AM Wrote:Nice work, good to hear ya got it all solved.

Where did you mount the fuse holder now to prevent this from happening again?
[right][snapback]177176[/snapback][/right]


I'm going to mount it to the metal brace that holds the windshield washer bottle.

I'll try to get to it this weekend.[right][snapback]177181[/snapback][/right]

In guelph?? whats that? your coming to guelph?
[right][snapback]177344[/snapback][/right]


Nobody wants to go to guelph :ph34r:

Brantford 4 Lyf3! :lol:
[right][snapback]177361[/snapback][/right]
f*** you dog breathe. I am moving closer to the bunny because he is my accomplice in life. We s*** disturbers have to stick together.

TEAM PITA Don't settle for a wannabe, only accept the real deal.

One day I will rule the world. For now, I have to settle for this place.
#33
s*** Disturbers eh?

haha, i should be king s*** disturber. after all i was the first to get banned here.

Bow to me!!!!!! :lol:
05 Altima SE-R
98 Grand Cherokee 5.9: Flowmaster; K&N
05 300C 5.7: Sold
99 Civic SIR: Sold
03 Focus SVT: Sold
01 Focus ZX3: Sold
#34
scoobasteve,Mar 27 2006, 06:38 PM Wrote:s*** Disturbers eh?

haha, i should be king s*** disturber. after all i was the first to get banned here.

Bow to me!!!!!!  :lol:
[right][snapback]177369[/snapback][/right]


you wish. jay banned me for an hour more than once.

get in line junior

TEAM PITA Don't settle for a wannabe, only accept the real deal.

One day I will rule the world. For now, I have to settle for this place.
#35
You and i both know....

Jay doesnt count...


Otherwise Andrew would be the winner
05 Altima SE-R
98 Grand Cherokee 5.9: Flowmaster; K&N
05 300C 5.7: Sold
99 Civic SIR: Sold
03 Focus SVT: Sold
01 Focus ZX3: Sold
#36
scoobasteve,Mar 27 2006, 06:43 PM Wrote:You and i both know....

Jay doesnt count...


Otherwise Andrew would be the winner [right][snapback]177377[/snapback][/right]


pretty sneaky.
TEAM PITA Don't settle for a wannabe, only accept the real deal.

One day I will rule the world. For now, I have to settle for this place.
#37
Sorry not really following through cause I need to get off to work, but from what I gather you need a stock wire harness on the focus side? If so there is a silver zx3 and standard auto wreckers upic yard, and I believe the stock harness's are still there its about the only thing the people have not stripped off the car so far.

Too let people know it has no doors, no front clip, no dash, no pillars, no center console, no wheels , can pm for info on what it might have left. I know its a distance for you to go to get there, if you want me to check it out again I can, to see if the connectors are there and pick them up for you. I am going back to get some parts probably this weekend to get some parts off of some other cars :ph34r:
2010 Hyundai Genesis 2.0T GT
2008 Jetta Sedan
2007 Colorado
2006 Jetta Wagon TDI (Totalled) (Monkey in the middle on 400)
2005 Mitsubishi Lancer Ralliart (Totalled)
2000 ZX3 (Darknights 2nd place Focus)
#38
ANTHONYD,Mar 27 2006, 07:46 AM Wrote:Turns out it wasn't the harness. Although I rewired it, it was still cutting out when I reved the engine, went around corners, and hit bumps. Just for kicks I popped the hood and to my suprise / stupidity, the fuse holder was smashed and the fuse was hanging out.

A quick trip to the shop and 20 bux later we're louder than ever. I guess it was a win win situation, I got the harness re wired that I wanted to do, as well as replacing the fuse holder and tidying up all the wires behind the dash. I put wire coweling around the rca cables to make it easier to navigate behind there. I did a nice clean job if I do say so myself! :P

Cheers!.
a.
[right][snapback]177161[/snapback][/right]
See I was right when I said check the fuse holder MUHAHHA.
2005 Liquid Grey ZX3 RIP
http://members.cardomain.com/phantom66
Mods so far : Mazda 3 Wiper Arm, Shorty Antenna, Alpine CDA-9887 HU, 17" Enkei Evo6 Hyper Black Nexen N3000 215/45/17
2010 World Rally Blue Subaru Impreza WRX STi
#39
One reason why I love stock. Dont need to worry about stuff like that.
#40
ZX3TUNR,Mar 28 2006, 01:43 PM Wrote:One reason why I love stock. Dont need to worry about stuff like that.
[right][snapback]177582[/snapback][/right]


Hahaha,

thats BS... i'll give ya 3 months until its modded... B)
05 Altima SE-R
98 Grand Cherokee 5.9: Flowmaster; K&N
05 300C 5.7: Sold
99 Civic SIR: Sold
03 Focus SVT: Sold
01 Focus ZX3: Sold


Forum Jump:


Users browsing this thread: 4 Guest(s)