Posts: 2,626
Threads: 178
Joined: Apr 2003
Reputation:
0
10-13-2005, 10:01 AM
(This post was last modified: 10-15-2005, 01:36 AM by Raine.)
K fellas so I'm sure many of us are coming in from the same parts of town. I think it'd be best to post where we're meeting up so that if anyone wants to join in and cruise down to the Gateway to Niagara, together we can (I know there's a few Seperate threads for this, but let's just keep it all here so there's no confusion).
This thread is only to post meeting spots and times.
------------------------------------------------
Toronto East/Scarborough/Oshawa/Whitby cruise:
Kennedy Commons, 401 & Kennedy Rd. Please meet in parking lot beside Chapters by 8:30 am. Those there will be leaving NO LATER than 8:45 am sharp.
link to thread discussing this meeting spot is here
--------------------------------------------------
Sarnia / London Convoy:
8:30am at the service centre east bound London!!
Now service centre going east bound just past London!
Link to the discussion thread for this meeting spot is
here
---------------------------------------------------
ed: use this thread to garner support for a pre-meet starting spot, but once decided on, have RAINE update this post to contain the meeting spot and time as well as a link to a thread for your particular meeting spot to keep things organized.
please open up pre-cruise meeting spot threads in the regional forums to keep G2G clutter down.
thanks
dp
p.s. Good thing the mods are updating this.
2000 Black ZX3
Blacked Out Head & Tail lights - APC Clear Turn Signals - 20% Tint All Round - K&N Filter - Cheap ass fogs that are brighter than my headlights - Clarion DXZ745MP - Jensen XA 4100 amp on Mobile Authority 200w 6x8's - Jensen 340w amp on a 12" Rockford Sub, custom enclosure - KYB GR2 Dampers - SHM Springs @ 1.5" - Brembo Cross Drilled Rotors w/ CVR Ceramic Pads - Silver Gauge Bezel - Focus Central 2-Piece Under Drive Pullies - 17 x 7 Rims by Fast Wheels mounted on 215/40/17's - Wings West W-Typ front lip - Coming Soon: Paint, Component Speakers (Spring 06)
Posts: 1,030
Threads: 63
Joined: Apr 2005
Reputation:
0
10-13-2005, 01:26 PM
(This post was last modified: 10-13-2005, 01:30 PM by ZX3guy2000.)
Coming over from Sarnia saturday morning? Anyone else along my way?? London I guess??? Probably be taking the 402...(not really sure what way it is as of yet) LOL :)
Skirt, Volant Intake, HID projectors, Eibach Suspension, SVT rims
Posts: 7,019
Threads: 347
Joined: Apr 2004
Reputation:
6
ZX3guy2000,Oct 12 2005, 11:26 PM Wrote:Coming over from Sarnia saturday morning? Anyone else along my way?? London I guess??? Probably be taking the 402...(not really sure what way it is as of yet) LOL :)
[right][snapback]148596[/snapback][/right]
Dead easy. 402 to 401 to 403 to QEW Niagara to the Casablanca exit.
TEAM PITA Don't settle for a wannabe, only accept the real deal.
One day I will rule the world. For now, I have to settle for this place.
Posts: 9,627
Threads: 938
Joined: May 2003
Reputation:
0
Raine,Oct 12 2005, 08:01 PM Wrote:K fellas so I'm sure many of us are coming in from the same parts of town. I think it'd be best to post where we're meeting up so that if anyone wants to join in and cruise down to Beamsville together we can (I know there's a few Seperate threads for this, but let's just keep it all here so there's no confusion).
This thread is only to post meeting spots and times.
Toronto East/Scarborough/Oshawa/Whitby cruise:
Kennedy Commons, 401 & Kennedy Rd. Please meet in parking lot beside Chapters by 9 am. Those there will be leaving NO LATER than 9:20 am sharp.
[right][snapback]148547[/snapback][/right]
Becareful what you Post Al.
The Gateway to Niagara is in Gimsby NOT Beamsville.
You are going to confuse matters if you continue to plan over top the originals.
Just thought you'd like to know! :)
Posts: 1,030
Threads: 63
Joined: Apr 2005
Reputation:
0
10-14-2005, 12:56 AM
(This post was last modified: 10-14-2005, 12:56 AM by ZX3guy2000.)
What time and where in London???
Somewhere prefereably off of the 402... let me know!
Either way I'll have my radio set to channel 7 when I leave london!
Skirt, Volant Intake, HID projectors, Eibach Suspension, SVT rims
Posts: 8,622
Threads: 898
Joined: May 2003
Reputation:
6
would be good if you guys can set up a meeting spot in London. set a time, location, and have RAINE update his post, and link to a new thread so people can easily find and discuss your particular pre-meet convoy.
Contribute to focuscanada.net's future!Donations of $20 and over get a custom title!
Posts: 2,781
Threads: 215
Joined: Dec 2004
Reputation:
0
10-14-2005, 02:50 AM
(This post was last modified: 10-14-2005, 03:12 AM by ZX5focused.)
what time should we meet in london? how long will it take from london to gatewya to Niagara??
what speed will we be travelling--- 110-120??
i beleive there is a service station on the other side of london on the 401, woudl that be a good meeting place?
main thing we need to determine is a meeting time.
edit: did a search london-->gateway to niagara = aprx 170 kms
leave london by 830???
'05 Grand Cherokee LTD Hemi
'02 black ZX5 ****currently on jack stands my parents garage missing a transmission****
--FC/OBX 4-2-1 Race Header--FS Flex--MBRP catback exhaust--AEM CAI--Brembo Brakes with Hawk HPS pads--Toucan(ractive) 9mm Plug wires--FC Plug wire cover--Polished aluminum Ractive Strut Bar
Not installed: FK 60/40 Springs
Posts: 1,030
Threads: 63
Joined: Apr 2005
Reputation:
0
8:30am at the service centre east bound London!!
Now service centre going east bound just past London!
Sounds good to me! I'll be driving by it tomorrow to get an idea of where it is!
Skirt, Volant Intake, HID projectors, Eibach Suspension, SVT rims
Posts: 2,781
Threads: 215
Joined: Dec 2004
Reputation:
0
ZX3guy2000,Oct 13 2005, 01:52 PM Wrote:8:30am at the service centre east bound London!!
Now service centre going east bound just past London!
Sounds good to me! I'll be driving by it tomorrow to get an idea of where it is!
[right][snapback]148760[/snapback][/right]
ya sounds good
get an idea of the mile marker, but im pretty sure there is one there. as of now i think it is jsut you and me meeting up there cause noone else has piped up.
'05 Grand Cherokee LTD Hemi
'02 black ZX5 ****currently on jack stands my parents garage missing a transmission****
--FC/OBX 4-2-1 Race Header--FS Flex--MBRP catback exhaust--AEM CAI--Brembo Brakes with Hawk HPS pads--Toucan(ractive) 9mm Plug wires--FC Plug wire cover--Polished aluminum Ractive Strut Bar
Not installed: FK 60/40 Springs
Posts: 2,781
Threads: 215
Joined: Dec 2004
Reputation:
0
update: i may be out due to the fact that my car is taking a s**t-fit right now
'05 Grand Cherokee LTD Hemi
'02 black ZX5 ****currently on jack stands my parents garage missing a transmission****
--FC/OBX 4-2-1 Race Header--FS Flex--MBRP catback exhaust--AEM CAI--Brembo Brakes with Hawk HPS pads--Toucan(ractive) 9mm Plug wires--FC Plug wire cover--Polished aluminum Ractive Strut Bar
Not installed: FK 60/40 Springs
Posts: 119
Threads: 36
Joined: May 2003
Reputation:
0
Raine,Oct 13 2005, 12:01 AM Wrote:K fellas so I'm sure many of us are coming in from the same parts of town. I think it'd be best to post where we're meeting up so that if anyone wants to join in and cruise down to Beamsville together we can (I know there's a few Seperate threads for this, but let's just keep it all here so there's no confusion).
This thread is only to post meeting spots and times.
------------------------------------------------
Toronto East/Scarborough/Oshawa/Whitby cruise:
Kennedy Commons, 401 & Kennedy Rd. Please meet in parking lot beside Chapters by 9 am. Those there will be leaving NO LATER than 9:20 am sharp.
link to thread discussing this meeting spot is here
--------------------------------------------------
ed: use this thread to garner support for a pre-meet starting spot, but once decided on, have RAINE update this post to contain the meeting spot and time as well as a link to a thread for your particular meeting spot to keep things organized.
please open up pre-cruise meeting spot threads in the regional forums to keep G2G clutter down.
thanks
dp
[right][snapback]148547[/snapback][/right]
Hey raine I thought we were supposed to be there by 10 AM???shouldn't we be leaving at around 8-8.30am.
B&G coilovers, Kamakazi headers,focus sport exhaust, 2.5 custom flex pipe, 18" oz rims, 65mm throtle body,ZX3 tuning custom cams,powerworks SC,spec 3 clutch,clutchnet 11lb flywheel,Eibach swaybar package,fs front lower stress bar,fs rear strees bar,svt big brake kit,quife diff,4.06 gears.(2012 plans FR head, 19lb boost & full engine rebuild) Good bye Escape hello 2012 focus 
Posts: 9,627
Threads: 938
Joined: May 2003
Reputation:
0
sweetg,Oct 13 2005, 05:43 PM Wrote:Raine,Oct 13 2005, 12:01 AM Wrote:K fellas so I'm sure many of us are coming in from the same parts of town. I think it'd be best to post where we're meeting up so that if anyone wants to join in and cruise down to Beamsville together we can (I know there's a few Seperate threads for this, but let's just keep it all here so there's no confusion).
This thread is only to post meeting spots and times.
------------------------------------------------
Toronto East/Scarborough/Oshawa/Whitby cruise:
Kennedy Commons, 401 & Kennedy Rd. Please meet in parking lot beside Chapters by 9 am. Those there will be leaving NO LATER than 9:20 am sharp.
link to thread discussing this meeting spot is here
--------------------------------------------------
ed:Â use this thread to garner support for a pre-meet starting spot, but once decided on, have RAINE update this post to contain the meeting spot and time as well as a link to a thread for your particular meeting spot to keep things organized.
please open up pre-cruise meeting spot threads in the regional forums to keep G2G clutter down.
thanks
dp
[right][snapback]148547[/snapback][/right]
Hey raine I thought we were supposed to be there by 10 AM???shouldn't we be leaving at around 8-8.30am.
[right][snapback]148870[/snapback][/right]
We leave the Gateway at 11:00am
BUT BE EARLY FOLKS! WE NEED TIME TO GO OVER A FEW THINGS!!!!!!!!!!
PLEASE BE THERE FOR 10-10:15!!!!!!!!!!!!!!!!!!!!
Posts: 2,626
Threads: 178
Joined: Apr 2003
Reputation:
0
7:45 here now. Scarborough guys, I'll see you in about 40 mins. Please be on time. I will be leaving at 8:45 sharp.
2000 Black ZX3
Blacked Out Head & Tail lights - APC Clear Turn Signals - 20% Tint All Round - K&N Filter - Cheap ass fogs that are brighter than my headlights - Clarion DXZ745MP - Jensen XA 4100 amp on Mobile Authority 200w 6x8's - Jensen 340w amp on a 12" Rockford Sub, custom enclosure - KYB GR2 Dampers - SHM Springs @ 1.5" - Brembo Cross Drilled Rotors w/ CVR Ceramic Pads - Silver Gauge Bezel - Focus Central 2-Piece Under Drive Pullies - 17 x 7 Rims by Fast Wheels mounted on 215/40/17's - Wings West W-Typ front lip - Coming Soon: Paint, Component Speakers (Spring 06)
|
Hi, Guest
