Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Good Gta Focus Mechanic Needed
#1
Right now I get all my oil changes and incidental repairs done at Midas. I am just curious if anyone knows of a reliable mechanic in the GTA that is good with foci as well.
Reply
#2
grandskam,Oct 3 2007, 03:34 PM Wrote:Right now I get all my oil changes and incidental repairs done at Midas.  I am just curious if anyone knows of a reliable mechanic in the GTA that is good with foci as well.
[right][snapback]250133[/snapback][/right]
GTA is a big area.........
Proud member of the CDan nation.
2000 White ZTS: retired
2012 Frosted Glass SEL: active
K&N Filter.....
Reply
#3
P R Performance knows Foci pretty well at one point there was 3 Foci there at the saem time it near dufferin and dupont area check the website http://www.prperformance.ca they also do general maintance
DruZX3 You Tube Page
My Rides on Car Domain

2001 Ford Focus ZX3 - Daily Driver
2008 Lincoln MKX Limited Edition - Grocery Getter
2007 Suzuki GSXR 600 - Rode and Sold
2004 Jeep Liberty Renegade - Offroaded and Sold
2008 Jeep Wrangler Unlimited X - R.I.P. Electrical Fire
2000 Ford Focus ZX3 - Traded in Now DrunkinMonkeys Car
2003 Ford Taurus Wagon - Inherited Drove and Sold
2000 Ford Focus ZX3 Turbo - Award Winning 336 WHP - Parted and Scraped
1990 Ford Festiva - My 1st Car

[Image: ZX3PixelCarEngineVIEW.png]
Reply
#4
Can anyone recommend good mechanics who knows what they do in GTA area. West (Oakvillish) preferred. I have been on 2 Ford dealerships and a few smaller guys and it was clear that they do not know what is SVT and how to even approach it.

My clutch is dying (was quoted 8 hours of labor)
Timing belt would be great to replace (100K – quoted 4.5 hrs)
Is that reasonable? I'm not sure...

I may have e week left on mu clutch - help pls......
Reply
#5
That’s it – now I have only 4 gears left working without slipping :(
Seems like Clutch going to fail sooner than I expected 

Anyone had experience in changing SVT 02 clutch.
Do I need to change Clutch, Pressure Plate, Slave Cylinder and Flywheel altogether?
Reply
#6
svtf are knowen for their sh*tty clutches....are u going to modify your focus at all?

cuz i was gonna say while ur at it get LSD in there :)
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Reply
#7
andrewned,Oct 10 2007, 09:10 AM Wrote:Can anyone recommend good mechanics who knows what they do in GTA area. West (Oakvillish) preferred. I have been on 2 Ford dealerships and a few smaller guys and it was clear that they do not know what is SVT and how to even approach it.

My clutch is dying (was quoted 8 hours of labor)
Timing belt would be great to replace (100K – quoted 4.5 hrs)
Is that reasonable? I'm not sure...

I may have e week left on mu clutch - help pls......
[right][snapback]250565[/snapback][/right]

If the SVT tranny is anything like the mtx75, it is not 8 hours. more like 4, thats coming from somebody who just performed his 1st clutch swap last year. ;) They may be including the time for the flywheel to be machined in that though. But R&R is not 8 hours.

4.5 hours for timing belt sounds about right. make sure they include a new waterpump in that quote :)

And guys....frig...help him out, I made a friggin sticky for this exact questions. :rolleyes:
[Image: ncclogo.jpg]
Reply
#8
Thank you for an update.

I've checked with Ford and they said that Timing belt can be changed after 200KM.
I', only 100K so will save this hassle.

Can anybody please help to understand which parts should I change when changing clutch in 02 SVTF?

I'll try to get new style Clutch + Flywheel. One mechanic said that I need to also change slave cylinder...

Now is the time for the parts and mechanic quest for me. If no good mechanics found in area I'll try myself.... Anyhow I need some parts:)
Reply
#9
to do a clutch is not all that bad, taking the fly wheel off and having it machined is kinda iffy... make sure you get a new throw out bearing, as for your slave cylinder,,, I dunno you probably should do it while it's all apart..

Timing belt should be lumped with a water pump and it's not a fun one.. let a mechanic save you the meds

ps bleed the breaks since your losing all that fluid when you do the clutch lol
[Image: forumsig.jpg]

I could List my mods.. my times and even my future mods here.. but there the same as yours.. with a little less conversation and a lot more action!
Reply
#10
ZED_not_zee,Oct 12 2007, 09:33 PM Wrote:to do a clutch is not all that bad, taking the fly wheel off and having it machined is kinda iffy... make sure you get a new throw out bearing, as for your slave cylinder,,
I'm looking to get LuK kit that has everything:
LuK 07-175Slave Cylinder Included, 2.0L Engine
Flywheel included

Hope they have everything necessary there.

Any comparisons of LuK 07-175 with Spec SF001/2 + SF30A ?
Reply
#11
I really like my spec setup, coldnt compare to the svt though.

If you are doing it yourself, and from the ground, make sure you give yourself as much room as possible. Get those candles as high as they can go. You'll swear less this way. :lol: :P
[Image: ncclogo.jpg]
Reply
#12
It look like I’d need a garage heater now ..

1) Who you guys are buying parts like Clutchmaster or LuK in GTA?

The best deals I’ve found so far are all in US:

Ultradev:
Clutchmaster Stage1: 07-168-HD00 380
Alumn Flywheel : FW-FOCUS-SVT-AL 380

Hite Parts:
Or LuK at 473 total at, but their website is down.

2) Anything else you’d recommend to change while doing clutch work?
It’s gonna take a day anyhow..
For example : Rear Main Seal ..?
Reply
#13
Gentlemen,

Any good mechanics in West end?

Last time I've been to Dixie Ford - will advise to NEVER go there! Maybe if you have Totyta, but not Ford...

I have:
-Check Engine light (car got stuck in snow with my girlfriend driving it and she stalled it million times )
- Engine shuts off on neutral a few times a day (was happening all the time but tnow more often)
- Can not flash my ECU with any SCT flashers (have no idea why)
- Airbag light is on.
- Front brakes vibrate when braking on high speeds (more than 90km/hr)

I want to have someone who actually knows what is he doing take care of the car....
Reply
#14
im dealing with a good priced mechanic in Markham
he gives me great prices
anyways he's asian and a nice quite guy

"Yasiya Auto Service Ltd"
Tel: (905) 209-1438
Cell: (416) 882-3901

156 Bullock Drive, Unit 33 (kinda McCowan&HW7)
he's gonna do my timing belt,water pump and maybe cam gears
anyways he told me the price and it was nice

if u call him tell him the guy with Ford Focus sent ya.......but yea he's great
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Reply
#15
andrewned,Feb 23 2008, 08:42 AM Wrote:Gentlemen,

Any good mechanics in West end?

Last time I've been to Dixie Ford - will advise to NEVER go there! Maybe if you have Totyta, but not Ford...

I have:
-Check Engine light (car got stuck in snow with my girlfriend driving it and she stalled it million times )
- Engine shuts off on neutral a few times a day (was happening all the time but tnow more often)
- Can not flash my ECU with any SCT flashers (have no idea why)
- Airbag light is on.
- Front brakes vibrate when braking on high speeds (more than 90km/hr)

I want to have someone who actually knows what is he doing take care of the car....
[right][snapback]258636[/snapback][/right]

Have you been able to pull any codes from the car at all? (I only ask because you mention SCT flashers and they are also trouble code readers as well)

NefCanuck
Reply
#16
The only code I've got is:nP1518 and it seems to be Intake Mainfold Runner Controller.

I've got check engine light just after my girlfriend got stuck in a snow and stalled the car multiple times.
Reply
#17
andrewned,Feb 24 2008, 06:22 PM Wrote:The only code I've got is:nP1518  and it seems to be Intake Mainfold Runner Controller.

I've got check engine light just after my girlfriend got stuck in a snow and stalled the car multiple times.
[right][snapback]258686[/snapback][/right]

I assume that any code reset just causes the Check Engine light to go out for a minute or two at start up before it re-appears?

NefCanuck
Reply
#18
andrewned,Feb 24 2008, 06:22 PM Wrote:The only code I've got is:nP1518  and it seems to be Intake Mainfold Runner Controller.

I've got check engine light just after my girlfriend got stuck in a snow and stalled the car multiple times.
[right][snapback]258686[/snapback][/right]

Is that the SPI engine in that car? It'll say Single Overhead Cam on the aluminum valve cover.
Daily driver 1: 2007 Jeep Wrangler Unlimited Sport "S"

33" BFG Mud-Terrain KM2s, lots of Rough Country gear - bumper, 2.5" lift, swaybar disconnects, Superwinch 10,000lb winch, Detroit Locker in rear D44 axle, custom exhaust, K+N filtercharger, Superchips-tuned.

Daily driver 2: 2006 Subaru Legacy GT

COBB Stage 1+ package - AccessPort tuner, COBB intake and airbox. Stage 2 coming shortly - COBB 3" AT stainless DP and race cat, custom 3" Magnaflow-based exhaust and Stage 2 COBB tune.
Reply
#19
Like i have mentioned before PR Performance is great with Foci hes done two turbo kits dropped a few trannys on them and great trouble shooter I wouldn't let anyone else touch my 2 foci give him a call at 416 604 1600 he has also updated his site at http://www.prperfromance.com
DruZX3 You Tube Page
My Rides on Car Domain

2001 Ford Focus ZX3 - Daily Driver
2008 Lincoln MKX Limited Edition - Grocery Getter
2007 Suzuki GSXR 600 - Rode and Sold
2004 Jeep Liberty Renegade - Offroaded and Sold
2008 Jeep Wrangler Unlimited X - R.I.P. Electrical Fire
2000 Ford Focus ZX3 - Traded in Now DrunkinMonkeys Car
2003 Ford Taurus Wagon - Inherited Drove and Sold
2000 Ford Focus ZX3 Turbo - Award Winning 336 WHP - Parted and Scraped
1990 Ford Festiva - My 1st Car

[Image: ZX3PixelCarEngineVIEW.png]
Reply
#20
ZX3_2NV,Feb 25 2008, 02:07 PM Wrote:Like i have mentioned before PR Performance is great with Foci hes done two turbo kits dropped a few trannys on them and great trouble shooter I wouldn't let anyone else touch my 2 foci give him a call at 416 604 1600 he has also updated his site at http://www.prperfromance.com
[right][snapback]258735[/snapback][/right]


better then your uncle's shop Focus wize?
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Help Mechanic Needed _JC_ 2 1,278 05-22-2008, 01:46 AM
Last Post: Flofocus

Forum Jump:


Users browsing this thread: 1 Guest(s)