+- FocusCanada Forums (//www.focuscanada.net/forum)
+-- Forum: Technobabble (//www.focuscanada.net/forum/forumdisplay.php?fid=4)
+--- Forum: Focus on Performance (//www.focuscanada.net/forum/forumdisplay.php?fid=22)
+--- Thread: New Intake Went On (/showthread.php?tid=14439)
Pages:
1
2
New Intake Went On - NOS2Go4Me - 06-28-2005
I'll let the pics speak for themselves, but the first one makes the strut bar look... discoloured :huh:
http://spaces.msn.com/members/loganteamx - it's the first album below the BBQ pics.
Also a shameless plug for a collection of 100+ pics from the BBQ :D
Before I get ahead of myself (again), props to Oscar TG for stopping by and lendin a hand as we swapped MAF housings (and your electrical tape :P )
New Intake Went On - microbunny - 06-28-2005
very nice, no clearance issues?
New Intake Went On - NOS2Go4Me - 06-28-2005
AHAHAHA you have no idea!!! But it's very stable. I had to wedge a piece of Dynomat by the one bracket on the driver's side strut tower to keep it from shredding the filter... a proper foam/rubber cap is going on there tomorrow.
It JUST fits, and I love how far over the filter is... it's better for cooler air for sure, and it's easier to hear :ph34r:
New Intake Went On - SL8RZZX3 - 06-28-2005
Dude that looks soooo much nicer under your hood than it ever did mine!
I'm so jealous! It's like that intake was made for your twisted lil spi B)
I miss the sound it made already :(
Just wait til you get you're TB, then you'll hear some boom unda tha hood!
I think you should look into getting your valve cover chromed, that would look sick
l8r
G
New Intake Went On - smith21 - 06-28-2005
lookin good adam!! now we gotta get together again to check it out !
New Intake Went On - hardk0re - 06-28-2005
that intake has gota be loud, when I had the ractive thats what I loved about it the most was the cool sound it made :)
New Intake Went On - NOS2Go4Me - 06-28-2005
smith21,Jun 27 2005, 09:24 PM Wrote:lookin good adam!! now we gotta get together again to check it out !
[right][snapback]117985[/snapback][/right]
We'll be in Suds this weekend for Canada Day, man. I'll have your cell # on me, we'll do Timmies again :D
And Kevin, it's DAMN loud! And seat-o-tha-pants says the mid-range picked up a tad as well... there's ZERO flatness compared to prior to the plugwires and intake swap.
Normally, especially in 2nd when rolling out around a corner (at a traffic light, etc) it would sorta "drop off" or bog some as the engine slowly made its way to 2500+ RPM. Now with both swaps done, it's night and day. It just pulls through, and the damn needle never swept that quick before through 40-60KPH in second. I wish I had remembered the damn reducer before we came down, Gord :( It would have made the drive home more fun.
2nd gear is much more fun and eventful now :lol: I haven't had it on the highway except for a brief stint down the bypass, so a good 140+ KPH run is yet to come.
Money. Well. Spent.
EDIT - it's worth noting I made a few 0-80 and 40-100 pulls in the sludge they call air that has invaded North Bay of late. It's like Hamilton all over again, you can see it 50ft away! I can't wait for a cooler-weather set of runs.
New Intake Went On - Raine - 06-28-2005
I think it looks way too crammed in there, but if you like it, good job :)
New Intake Went On - Oscar The Grouch - 06-28-2005
Bah.. You did all the hard work this time. All I did was supervise. :D
New Intake Went On - skifreak69 - 06-28-2005
Oscar The Grouch,Jun 27 2005, 07:44 PM Wrote:Bah.. You did all the hard work this time. All I did was supervise. :DSupervision is the most important part, you need to know who to blame and also be able to explain the process when being congratulated. :lol:
[right][snapback]118017[/snapback][/right]
Looks good though.
New Intake Went On - ANTHONYD - 06-28-2005
You need an engine degrease!
New Intake Went On - NOS2Go4Me - 06-28-2005
Actually, I'm terrified of de-greasing my engine... never done one before, and I don't wanna short anything out or wreck anything.
Does anyone have a n00bified guide on doing this?
New Intake Went On - Flofocus - 06-29-2005
NOS2Go4Me,Jun 28 2005, 09:11 AM Wrote:Actually, I'm terrified of de-greasing my engine... never done one before, and I don't wanna short anything out or wreck anything.
Does anyone have a n00bified guide on doing this?
[right][snapback]118074[/snapback][/right]
This is the way I do it...
I start with a cold engine. Some start with a warm one, some hot....some use the pressure washer :blink:
With the turbo and how sensitive my car is to water, I actually take out my intake and plug the other end with a clean rag. I put a plastic bag over my sparks plugs, coil pack, Altenator, MAF Sensor, O2 Sensor (wires are exposed from putting the AF Guauge), and anywhere else I feel paranoid about. lol. Seems like a lot, butI'm terrified of screwing something in there also. Plus my car runs like s**t just after washing it :o I always had problems with my car and the rain, even when it was just stock, with the turbo its worse. Cant wait to go to Jay to figure some stuff out.
I then use a spray bottle with water and start applying a mist over the entire engine bay. After that I use some degreaser, I use Citrous Degreaser, it works well, simple green will do it to. Same thing, I spray mist over everything, and let it soak for about 2-3 minutes. Then I rinse with a hose with NO attachments on it, and turn it on so the water is just trickling out. I use a heavy duty Rag (more than 1 ) and start rinsing a wiping away grime with it.
I ususally use black chrome or Tire dressant to polish up all the black parts like, Battery cover, intake pipe, valve cover, vaccum hoses, etc after the wash is done.
![[Image: DSCF1036.jpg]](http://img.photobucket.com/albums/v76/Flofocus/Turbo/DSCF1036.jpg)
New Intake Went On - Flofocus - 06-29-2005
and yes, you really need to clean your engine bay :P
New Intake Went On - NOS2Go4Me - 06-29-2005
Swank, I just printed that out. Thanks Nate!
Why the heck aren't you on MSN? I wanted to hear more about your "ideas" for the car :ph34r:
New Intake Went On - ANTHONYD - 06-29-2005
![[Image: IMG_1093.jpg]](http://img.photobucket.com/albums/v108/AnthonyD/IMG_1093.jpg)
![[Image: IMG_1018.jpg]](http://img.photobucket.com/albums/v108/AnthonyD/IMG_1018.jpg)
![[Image: IMG_0966.jpg]](http://img.photobucket.com/albums/v108/AnthonyD/IMG_0966.jpg)
It's easy, and with results like this, I can't figure out why someone WOULDN'T want to do it.
New Intake Went On - NOS2Go4Me - 06-29-2005
I agree completely, I just didn't want to ruin anything under the hood due to water damage, corrosion, etc... which is why I asked for the n00b-level guide :)
New Intake Went On - nass - 07-18-2005
can't you just put that degreaser in a bucket of water, trying not to dilute it too much put rag in bucket and wet, then rub? or go with a rag dipped in water to wet the engine, then apply degreaser directly on the rag then goto town?
Ive never done this either... never had an urge to show off my engine to anyone and I don't goto shows so meh... but if I were to do it I would attempt my ideas first.
New Intake Went On - Kool_ZX3 - 07-19-2005
nass,Jul 18 2005, 09:59 AM Wrote:can't you just put that degreaser in a bucket of water, trying not to dilute it too much put rag in bucket and wet, then rub? or go with a rag dipped in water to wet the engine, then apply degreaser directly on the rag then goto town?
Ive never done this either... never had an urge to show off my engine to anyone and I don't goto shows so meh... but if I were to do it I would attempt my ideas first.
[right][snapback]123133[/snapback][/right]
yah want to know a good way to degrease your engine bay this is the way to do it.
Get yourself some castrol super clean and dilute it 5:1 or a can of gunk engine degreaser and spray your engine down good, making sure all sensor's and intake are covered with tin foil or something else suitable for the job. Scrub all the nasty spots with a brush then leave sit for 5-10 mins then hose it all down. After wipe all dry with a towel. Then take a hlf ass vinyl and rubber dressing like armour all or something and wipe down the engine bay plastic and rubber, buff of access and Pow u have a nice lookin engine bay like A.D's :)
New Intake Went On - smith21 - 07-20-2005
seeing as we are on the topic of engine bay cleaning, anybody get their car rust sprayed and get that yellow'ey looking grease feeling s**t all over the place in their engine bay? how do i get this off, other than using a cloth, will the degreaser and a lil elbow grease work? or will i need more?