Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Focus Central Intake Manifold (mitch Maybe Knows?)
#1
Well believe it or not i found a good deal on Focus Central intake manifold......yea they don't make those any more and haven't for the longest time....
at first i was really happy but after doing some research i thought that it would not be all that good with all those mods....but maybe it would.....wow.....lost

let me hear what you guys think
by the way here are my upcomming mods
http://www.focuscanada.net/forum/index.p...opic=21737

and here's the intake manifold
http://www.zx3tuning.com/engine_02.html
and some actual shots
[Image: 1-1.jpg]
[Image: 2-1.jpg]
[Image: 3-1.jpg]
[Image: 4-1.jpg]


this is gettin worst....looks like i will have to get the head P&P
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Reply
#2
NikiterZTS,Jul 3 2007, 02:50 AM Wrote:this is gettin worst....looks like i will have to get the head P&P
[right][snapback]242917[/snapback][/right]

i'd take a step back and re-assess the costs bro.. if you are getting within striking distance of going turbo bite the bullet and do that instead.. stick to your orig plan man!!
Reply
#3
i mean im not even paying close to $800 for this thing
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Reply
#4
so.. if i gather correctly, you are already going to buy a chip for your NA setup, and also dyno time and pay someone to tune it.. that's the same thing if you got a turbo kit.. so the price differential is really just the parts cost.

i did a 2sec search on ebay.. there's a 'hardware' turbo kit on sale for $1k.. you need to get injectors, make a downpipe. so figure like $1500

so i'm thinking you should be paying a lot less than $1500 in parts for your complete NA setup, since you are getting less power

http://cgi.ebay.com/ebaymotors/00-03-FORD-...sspagenameZWDVW
Reply
#5
That thing looks pretty cheap if you ask me. You would think for $800 retail they would at least make it look nice. It looks as if it was made by a 4 year old with playdough.
Focus man, Focus........ Team Psychological Disaster
2008 Taurus X to be modded.
2002 ZX5 parted out. Forever known as the "SLOCUS".

2010 Dyno #'s 102.96HP/105.84TQ
2011 Dyno #'s 111.44HP/115.17TQ
Still The Weakest LinkBlush

Dial 1-800-AUTO-PARTS for your local speed shop.
Reply
#6
true...turbo would be the best bang...but this engine is too old for it aka too much miles
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Reply
#7
NikiterZTS,Jul 3 2007, 01:21 PM Wrote:true...turbo would be the best bang...but this engine is too old for it aka too much miles
[right][snapback]242975[/snapback][/right]


Can you not get the engine tested, like a compression test or something, to see if the engine is in good condition? Maybe nate can get you a new engine cheap, I remember that from a while back for something like $300-400 Possible??

I do recalling a couple turbo setup on FF in the 1500-1900 range and they are just missing various vaccumn lines and couplers I think.



Skirt, Volant Intake, HID projectors, Eibach Suspension, SVT rims
Reply
#8
i can actually find an engine around here (GTA) for the same price and low K's......i did my search on that....

maybe in 2 summers :P
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Reply
#9
NikiterZTS,Jul 3 2007, 05:21 PM Wrote:true...turbo would be the best bang...but this engine is too old for it aka too much miles
[right][snapback]242975[/snapback][/right]

i don't think its that big of a deal.. and if you raise the rev limit for your NA setup i think its harder on the engine than boost and not revving as much.
Reply
#10
I bought a motor with EVERYTHING and an auto trany for $250,, yea two hundred and fifty WOOOT!!!!
[Image: forumsig.jpg]

I could List my mods.. my times and even my future mods here.. but there the same as yours.. with a little less conversation and a lot more action!
Reply
#11
I agree with Naz... a LPT setup would make about as much, even 7-8 PSI without an intercooler with less revs. Well, 8 PSI would be in the 190-200 WHP range anyways. Pllus, you'd have piles more torque and "snap" to the engine without any more wear than high-revving the N/A setup.
Daily driver 1: 2007 Jeep Wrangler Unlimited Sport "S"

33" BFG Mud-Terrain KM2s, lots of Rough Country gear - bumper, 2.5" lift, swaybar disconnects, Superwinch 10,000lb winch, Detroit Locker in rear D44 axle, custom exhaust, K+N filtercharger, Superchips-tuned.

Daily driver 2: 2006 Subaru Legacy GT

COBB Stage 1+ package - AccessPort tuner, COBB intake and airbox. Stage 2 coming shortly - COBB 3" AT stainless DP and race cat, custom 3" Magnaflow-based exhaust and Stage 2 COBB tune.
Reply
#12
first of that turbo kit up there is work only about its weight in metal, those turbos are ching chong meow knock offs that will run for about 3 hours, the manifold i give it about 3 months then it cracks,

atleast your buying alot of things that will be good for boost tho, the intake mani will work nicely with boost.

but if you want a solid turbo kit for not soo much cash, i would hit up http://www.blasstperformance.com

thats were i got my turbo from and it kicks ass.

and your engine doesnt have too many miles on it, your just stalling nik.
my engine has 100,000 miles on it, and the last 20,000 have been boosted.

what im trying to get at is
PUT A TURBO IN IT DAMN IT!!!!!!!!!!!!!!!!!!!!!!!!!

[Image: forumn-stuffcopy.jpg]
Reply
#13
aaaahhhh... too late brother...everything is payed for.......but ur right.....i should of....i so should of :unsure:
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Code 2004: Intake Manifold Runner Control Stuck open Krusty Driver 4 2,870 11-05-2013, 03:55 PM
Last Post: Krusty Driver
  2.0l cosworth intake manifold, check it out GFXjamie 8 7,467 02-17-2011, 02:37 AM
Last Post: GFXjamie
  Cosworth Intake Manifold Scorcher000 126 37,780 03-04-2010, 11:52 AM
Last Post: Spinal
  Focus Central Parts GFXjamie 5 2,319 12-03-2009, 02:48 PM
Last Post: GFXjamie
  Intake Manifold Design kamilk69 14 9,429 02-22-2009, 12:28 PM
Last Post: Jmountney1
  Focus Central/esslinger 3 Piece Udp Focus man. Focus. 13 4,926 08-07-2008, 02:35 AM
Last Post: Focus man. Focus.
  Ported 2000 Intake Manifold NikiterZTS 24 7,861 05-02-2007, 12:28 AM
Last Post: NikiterZTS
  Is This A Focus Central Udp? Alec Brandon 5 2,116 04-14-2007, 04:47 AM
Last Post: Black_ZTS
  Ported Intake Manifold Alec Brandon 3 2,497 04-09-2007, 04:03 AM
Last Post: NikiterZTS
  Svt Intake Manifold Popped Off? torradan 5 2,703 08-01-2006, 01:25 AM
Last Post: hardk0re

Forum Jump:


Users browsing this thread: 1 Guest(s)