Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Question About Installing Mach Hid
#1
hi guys, i have a question, Ford quoted me the jumper harness, part number YS4Z-13A006-CA for $90 for a piece :blink: that's very expensive in my opinion because it will be $180 for both side and I will still need to get other parts from VW dealer. So the price for the wiring itself will be $200+

So is there other ways to get the wiring harness done cheaper?
2001 Yellow Focus ZX3
Reply
#2
it's the same piece that is in the stock headlights....(square plug on the back of the headlight with 3 wires that run inside the headlight to the H4 bulb "socket")

So if you can get your hands on some cheap then go that way.

or go to the wreckers and rip 'em out and stick them in you pocket ;)
2002 pitch black ZX3
__________________
Mach HIDs, 02 RS upper grille, Cervini's body kit, DTM drop mirrors, D2 coilovers, purple focussport strut tower bar and chrome rear bar, purple FC tb, Powerworks supercharger, optima yellow top, SVT ceramic coated header,Random Tech SVT/Zetec hi-flow cat , bosal flex, vibrant cat back with custom dual tips, b&m short throw shifter, pro-fit fuel door, shorty antenna, race-pedals.com "focus" pedals, clear 3rd brake light, SVT hvac controls, Transfer Racing billet hvac knobs, RS shift knob, RS Sparco E-brake handle, Mazda3 rear wiper, CarZone 3 piece roof wing, 17" Keskin KT4 wheels

Classic Painting
Reply
#3
Did you look into the Ford Racing harness that has the DRL funtion built in?

read the "Retro Vision" article in the FALL 2004 issue of focus fanatic magazine

not sure if it's avalable seperate from the HID kit, but might be worth looking into

2002 pitch black ZX3
__________________
Mach HIDs, 02 RS upper grille, Cervini's body kit, DTM drop mirrors, D2 coilovers, purple focussport strut tower bar and chrome rear bar, purple FC tb, Powerworks supercharger, optima yellow top, SVT ceramic coated header,Random Tech SVT/Zetec hi-flow cat , bosal flex, vibrant cat back with custom dual tips, b&m short throw shifter, pro-fit fuel door, shorty antenna, race-pedals.com "focus" pedals, clear 3rd brake light, SVT hvac controls, Transfer Racing billet hvac knobs, RS shift knob, RS Sparco E-brake handle, Mazda3 rear wiper, CarZone 3 piece roof wing, 17" Keskin KT4 wheels

Classic Painting
Reply
#4
SL8RZZX3,Jan 24 2006, 06:02 PM Wrote:Did you look into the Ford Racing harness that has the DRL funtion built in?

read the "Retro Vision" article in the FALL 2004 issue of focus fanatic magazine

not sure if it's avalable seperate from the HID kit, but might be worth looking into
[right][snapback]166817[/snapback][/right]

Willie..I have that issue of focus fantic at home, if you need it just come by my home and get it.
JMS US spec front lip, Rieger R-RX side skirts, Rieger R-RX rear apron, European rear bumper, European tail lights, RPMlabs grill, Painted side mirrors cover, H4 HID kit, Lamin-X yellow fogs, shorty antenna, Loder1899 replica rear spoiler, weathertech window delfector, Injen short ram air box, FC UDP pulley, FC 65mm TB, Focussport race header, Focussport flex, magnaflow hi-flow cat, MBRP catback, SCT Xcal2, ford racing spark plug wire, Tein S-tech, FK Damper kit, Eibach rear camber kit, Focussport strut bar, Painted valve cover, TeamDynamic pro race 1.2 17", Kumho SPT 205/45/17, Hawk HP, brembo blank rotors, Russell SS brakelines, Motul dot 5.1, Recaro replica seats on Recaro seat base, KKM shift surround, In-dash 7" DVD player, Tein Damper-chi doll!!
Reply
#5
i've already asked ford racing, and they said the wiring harness cannot be bought separatly~~
2001 Yellow Focus ZX3
Reply
#6
That is terribly expensive, considering when I bought that part the Ford price was under $15 each. That was before they realized that everyone was buying them to retro-fit the HID headlights (which were only available on the Mach audio sedan at that point). See if you can find a wrecker with a front-end damaged Focus with broken headlights and yank the harnesses off them, that would be the cheapest way.
Reply
#7
yeloZX3,Jan 24 2006, 06:19 PM Wrote:i've already asked ford racing, and they said the wiring harness cannot be bought separatly~~
[right][snapback]166845[/snapback][/right]

ok then your cheapest bet is the VW plugs and wires + the stock headlight inner harnesses

i have it done this way and have had no problems

OR just wire them direct with the VW harness if you think you don't want to go back, but i like having it "plug and play" myself

congrates on the ebay win!

if you want you can come over and we can hook them up on my car and make sure they're 100% before you fork out the dough on the ford harnesses
2002 pitch black ZX3
__________________
Mach HIDs, 02 RS upper grille, Cervini's body kit, DTM drop mirrors, D2 coilovers, purple focussport strut tower bar and chrome rear bar, purple FC tb, Powerworks supercharger, optima yellow top, SVT ceramic coated header,Random Tech SVT/Zetec hi-flow cat , bosal flex, vibrant cat back with custom dual tips, b&m short throw shifter, pro-fit fuel door, shorty antenna, race-pedals.com "focus" pedals, clear 3rd brake light, SVT hvac controls, Transfer Racing billet hvac knobs, RS shift knob, RS Sparco E-brake handle, Mazda3 rear wiper, CarZone 3 piece roof wing, 17" Keskin KT4 wheels

Classic Painting
Reply
#8
i may just wire them direct to the factory harness without that plug (i won't cut the whole wire, i'll just cut the outer plastic tube of the wire if u know what i mean :P )

ya thanks for the offer SL8RZZX3, i'll contact u if i want to test them before installing them =)
2001 Yellow Focus ZX3
Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)