[hardk0re]

SmokeBCBuDZ,Jan 13 2007, 12:33 AM Wrote:

hardk0re,Jan 13 2007, 04:32 AM Wrote:Yeah so get something to plug those :)  and put anti-sieze on it so if you want to take them out one day they'll come out :P
[right][snapback]223165[/snapback][/right]

How would I go about plugging those? An I guess I wouldn't want the O2 in because I would get a check engine light?
[right][snapback]223167[/snapback][/right]

Same deal parts source/uap or crappy tire should have the stuff you need. Pickup some copper anti-sieze while your there. And you will throw a CEL unless you got a o2 cheater harness.

SmokeBCBuDZ Wrote:What is the other hole for?

On the header you got two holes, 1st one put the 1st o2 sensor, 2nd one put the 2nd o2 sensor. You'll need an o2 cheater, you can buy one from steeda, its real nice plug and play or you can build one. (don't ask me how cuz I don't know.hehe). In the flex plug those two holes.

Make sure when you swap the o2 sensors from your stock stuff to your new header, you put copper anti-sieze on the threads so you'll have an easier time removing them later. Same with the bungs your going to put in the flex to plug the holes. They are probably standard size bungs that most exhaust shops will have.