Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Cracked Wheel And Now...
#11
oooor wait a minute.. this seems like a show points tuner purchase... nevermind!!

in case you are interested in my opinion





you sure about your calculations dude? 225/40/18 is 1.2" larger in diameter than 215/35/18.. plus depending on the different tire you are using a 225 tire can run a LOT wider than a 215 tire. (there are some 235 width tires out there that were same width as my 225 width azenis RT615)

so you are putting on a larger diameter tire, that is wider, with a potentially different offset wheel

you are the tuner not me.. i'm just saying i'd be really careful before buying if i was you

also the static ride height doesn't mean anything. so what if it doesn't rub when you are in the parking lot. what matters if whether it will rub when the suspension is fully loaded, such as a fast sweeper with an uphill corner entrance. you don't want to have to slow up because you are afraid of rub. that defeats the point of having the wider tires
Reply


Messages In This Thread
Cracked Wheel And Now... - konafocuswrc - 06-12-2008, 12:35 AM
Cracked Wheel And Now... - NikiterZTS - 06-12-2008, 02:17 AM
Cracked Wheel And Now... - naz - 06-12-2008, 02:52 AM
Cracked Wheel And Now... - ZTWsquared - 06-12-2008, 03:25 AM
Cracked Wheel And Now... - konafocuswrc - 06-12-2008, 10:34 AM
Cracked Wheel And Now... - konafocuswrc - 06-12-2008, 10:39 AM
Cracked Wheel And Now... - Burnin21 - 06-12-2008, 12:38 PM
Cracked Wheel And Now... - naz - 06-12-2008, 07:37 PM
Cracked Wheel And Now... - konafocuswrc - 06-12-2008, 11:15 PM
Cracked Wheel And Now... - konafocuswrc - 06-13-2008, 08:09 AM
Cracked Wheel And Now... - naz - 06-13-2008, 09:35 AM
Cracked Wheel And Now... - konafocuswrc - 06-13-2008, 10:45 AM
Cracked Wheel And Now... - konafocuswrc - 06-13-2008, 11:00 AM
Cracked Wheel And Now... - naz - 06-13-2008, 11:04 AM
Cracked Wheel And Now... - konafocuswrc - 06-15-2008, 03:06 PM
Cracked Wheel And Now... - naz - 06-15-2008, 06:09 PM

Forum Jump:


Users browsing this thread: 5 Guest(s)