03-23-2005, 02:07 PM
guilty is correct, if they only have single filament for the bulb behind the red lens, it may be difficult to wire up. Now.. I havent messed arround with the tail light wire configuration, but I have an idea to re-use the existing wire harness and bulbs that come on the north american tail lights, just unplug the wire & bulbs only, and re-fit them to the european tail lights. you might have to do some small modifications like making the hole where the bulb goes bigger or smaller, but it should fit and work like your stock North American tails. if you want to re-locate stuff like your reverse lamps into your bumper, etc.. now thats a totally different story and I cant help you with that just yet. but try my suggestion and see if it works. That way, there is NO splicing or Cutting of any wires.
My other ride is your Mom