[JRC ZX3 2003]

Oscar The Grouch,Jul 13 2005, 07:36 PM Wrote:Actually, you can push that switch from the inside out.  The cord should be long enough for good slack.  Then what you have to do is disconnect the plug from the cable.  on the plug there is a little slot clip, you might need a standard flathead screwdriver to help you get it off.

There should be 3 clips in the trim piece around the door opening latch.

As for the trim peice, there should be 3 clips as well, one on the top, one on the side and one near the door hinges.  Basically you have to pry it from the bottom and it should pop out.

I'll see if I can whip up some pics.
[right][snapback]121968[/snapback][/right]

Pics would be awsome thanks. The trim piece has 2 clips on top, i know that for sure.