Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Done My Last Major Car Mod For 2007
#1
Welp, bit the bullet and today had the SVT suspension dropped into my car by Dixie Ford.

Finally the car doesn't look like it could go off roading at a moments notice and doesn't lean like a drunk on free beer night in the curves if pushed :D As an added bonus, no more nosediving under hard braking :)

Pics when I get the car washed again (Dear god, the Dixie mechanics obviously didn't use any sort of protection on the fenders... Disgusting grease marks :puke: )

NefCanuck
Reply
#2
hey Dan congrats buddy

lets taking to lapping tack now......i still have have to test mine
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Reply
#3
NikiterZTS,Sep 12 2007, 09:47 PM Wrote:hey Dan congrats buddy

lets taking to lapping tack now......i still have have to test mine
[right][snapback]248691[/snapback][/right]

Have to see what my schedule is like (Once I go back to work Monday I expect to buried in crap up to my eyeballs for a while) but yeah, I wouldn't mind that....

NefCanuck
Reply
#4
Your dealer doesn't wash your car after doing work to it????

Reply
#5
I thought that 05 suspension was different that 00 - 04
Ford Focus SES ZX5
Blue Underglow, Clear Corners, Shorty antenna, vogtland springs , Rust Module,Truebendz 2.5 ss magnaflow and Fuzion 205/50/16 HRI's
TEAM DURATEC # 99
Reply
#6
^ Nope, they only changed it in '06
The '05 is lucky in a way to have the same as 00-04. More options!

ANTHONYD,Sep 13 2007, 08:32 AM Wrote:Your dealer doesn't wash your car after doing work to it????
[right][snapback]248700[/snapback][/right]

What kind of work?
When I get an oil change, I don't get a wash with it.
I used to get a wash with my SVT Cobra though, at another dealer.
2007 CD Silver ST  **** FOR SALE ****
2014 Performance Blue ST  **** SOLD ****

2016 Ford Edge Sport Shadow Black
Reply
#7
ANTHONYD,Sep 13 2007, 07:32 AM Wrote:Your dealer doesn't wash your car after doing work to it????
[right][snapback]248700[/snapback][/right]

This was a one off, but yeah you'd figure after I dropped $1500 (which included a bent right tie rod end, not ESP applicable) they'd at least run a hose over it <_<)

NefCanuck
Reply
#8
Gravter,Sep 13 2007, 11:19 AM Wrote:^ Nope, they only changed it in '06
The '05 is lucky in a way to have the same as 00-04. More options!
[right][snapback]248714[/snapback][/right]

Yes & no, apparently to shove in the SVT kit on the 05 required them to drop the subframe assembly so that added to the labour cost due to the extra time to drop & replace that assembly (Though had the tie rod end not been bent they would have had the job done @ around 3:30pm)

So now I'm the second wanna be SVT that I know of (The other being GapboyPCS) but the only one I know of that did the upgrade to an 05 model :P

NefCanuck
Reply
#9
Gravter,Sep 13 2007, 12:19 PM Wrote:
ANTHONYD,Sep 13 2007, 08:32 AM Wrote:Your dealer doesn't wash your car after doing work to it????
[right][snapback]248700[/snapback][/right]

I used to get a wash with my SVT Cobra though, at another dealer.
[right][snapback]248714[/snapback][/right]

Thats because you had an svt, suppose to get free washes when your an svt customer.
[Image: ncclogo.jpg]
Reply
#10
Flofocus,Sep 13 2007, 02:28 PM Wrote:suppose to get free washes when your an svt customer.
[right][snapback]248727[/snapback][/right]


You serious?
2000 Ford Focus Roush Turbo & 2004 Focus sedan
Reply
#11
so how do you like the handeling now Dan?
2002 Ford Focus ZTS (Gave it away)
125whp/129wtq
2006 Subaru Impreza WRX with JDM 6 speed
207whp/273wtq Innovative tuned on Mustang dyno (Stage 2)13.9@99mph
320whp/330wtq Innovative tuned on Mustang dyno (Stage 3)
352whp/360wtq Dynojet
13.3@106mph
2004 Ford F-150 Lariat
2008 Honda CBR600RR "Silver Bullet" R.I.P.
2009 Honda CBR600RR "To Punish & Enslave"
2001 Honda CBR F4i Stunt bike "Burn the Rubber, not your soul"
2013 China 90cc dirt bike
Reply
#12
NikiterZTS,Sep 13 2007, 02:24 PM Wrote:so how do you like the handeling now Dan?
[right][snapback]248737[/snapback][/right]

Well, obviously a bit stiffer than stock over bad roads (But the leather seats cushion most of that, though I haven't hit the "train tracks 'o doom" on Altona Rd. in Pickering yet for the ultimate torture test) but turn in is much better with almost no body lean that I can detect, though I'll have to try my favourite right hander to see if I'm just imagining that.

I've hit a few on & off ramps on the highway and no lean there either, haven't hit one of the 3/4 circle ones yet but I'm expecting those to be real fun now :lol:

NefCanuck
Reply
#13
Sweet! Congrats!
'14 Escape 2.0t
2012 5dr Ti : Traded
Reply
#14
Congrats on the upgrade, man! You had the 05 SES suspension, right?

I've noticed that mine is almost as stiff as the S2 suspension, so I'm wondering if they really did change part #s for the 06/07 crowd (on top of LCAs and other lower bits).

You're also lucky that you CAN bolt up the SVT gear :angry: :P
Daily driver 1: 2007 Jeep Wrangler Unlimited Sport "S"

33" BFG Mud-Terrain KM2s, lots of Rough Country gear - bumper, 2.5" lift, swaybar disconnects, Superwinch 10,000lb winch, Detroit Locker in rear D44 axle, custom exhaust, K+N filtercharger, Superchips-tuned.

Daily driver 2: 2006 Subaru Legacy GT

COBB Stage 1+ package - AccessPort tuner, COBB intake and airbox. Stage 2 coming shortly - COBB 3" AT stainless DP and race cat, custom 3" Magnaflow-based exhaust and Stage 2 COBB tune.
Reply
#15
NOS2Go4Me,Sep 14 2007, 08:35 AM Wrote:Congrats on the upgrade, man! You had the 05 SES suspension, right?

I've noticed that mine is almost as stiff as the S2 suspension, so I'm wondering if they really did change part #s for the 06/07 (on top of LCAs and other lower bits).

You're also lucky that you CAN bolt up the SVT gear :angry: :P
[right][snapback]248775[/snapback][/right]

Yeah and man I'm really surprised at the difference in suspension firmness beween the SES and the SVT running gear. I was out and about today and stopped for dinner in a mall that uses speed bumps to try and keep people's speeds down.

What a difference, the stock SES setup would go over and then on the rebound crash against the bumpstops, with me nearly beaning myself in the process. Go over those same speedbumps with the new setup? Up and over, no rebound, no drama and no head trauma, I'm in love :bowdown:

Still can't understand why they even bothered to change the setup on the 06 & 07 models, maybe they found a way to do things cheaper :iono:

NefCanuck
Reply
#16
prolly a newer system for the newer models why not use the 06 07 for the change to test system for 08 +
Ford Focus SES ZX5
Blue Underglow, Clear Corners, Shorty antenna, vogtland springs , Rust Module,Truebendz 2.5 ss magnaflow and Fuzion 205/50/16 HRI's
TEAM DURATEC # 99
Reply
#17
Cool, I think I'm going to do that to my wifes 01 se. I heard that the SVT package is great. Did you use the 21mm rear bar to??? I wonder if there is a noticable difference between the 21mm and the stock 20mm? I may have to scoop the rear bar from the kit :ph34r: I have the SVT type dampers in my car and I love them, I can really feel the road. There is still to much body roll though with the stock springs, oh well maybe new ones are in order.
[center]TEAM PITA™ Don't settle for a wannabe, only accept the real deal.[/center]
Reply
#18
Canadian ST,Sep 14 2007, 08:00 PM Wrote:Cool, I think I'm going to do that to my wifes 01 se. I heard that the SVT package is great. Did you use the 21mm rear bar to??? I wonder if there is a noticable difference between the 21mm and the stock 20mm? I may have to scoop the rear bar from the kit :ph34r: I have the SVT type dampers in my car and I love them, I can really feel the road. There is still to much body roll though with the stock springs, oh well maybe new ones are in order.
[right][snapback]248802[/snapback][/right]

I had them install the entire kit so I'm not sure what the thickness of the SVT rear bar actually is offhand (Anybody with an SVT care to chime in here?)

:blink: You mixed & matched between SVT parts & non SVT parts? I didn't think you could do that without sending the handling into the crapper :iono:

I managed to drag the old parts up to my place and they're in storage (the stock stuff only has 56K on it) so I may look at seeing if anybody wants it.

NefCanuck
Reply
#19
NefCanuck,Sep 15 2007, 12:54 AM Wrote:
Canadian ST,Sep 14 2007, 08:00 PM Wrote:Cool, I think I'm going to do that to my wifes 01 se. I heard that the SVT package is great. Did you use the 21mm rear bar to??? I wonder if there is a noticable difference between the 21mm and the stock 20mm? I may have to scoop the rear bar from the kit :ph34r: I have the SVT type dampers in my car and I love them, I can really feel the road. There is still to much body roll though with the stock springs, oh well maybe new ones are in order.
[right][snapback]248802[/snapback][/right]

I had them install the entire kit so I'm not sure what the thickness of the SVT rear bar actually is offhand (Anybody with an SVT care to chime in here?)

:blink: You mixed & matched between SVT parts & non SVT parts? I didn't think you could do that without sending the handling into the crapper :iono:

I managed to drag the old parts up to my place and they're in storage (the stock stuff only has 56K on it) so I may look at seeing if anybody wants it.

NefCanuck
[right][snapback]248811[/snapback][/right]



Well the stock SES/ST rear swaybar size is 20mm, the swaybar that comes in the SVT kit is 21mm. I should have worded myself better sorry :blink: The ST comes with "SVT type dampers" (M-18000-zx3b)since they changed stuff for 06,07. They are the same as yours just are for the new suspension change. It makes me wonder if I can use the new Ford Racing lowering springs (m-5560zx3b) I'll ask Ford see what they say. :ph34r:
[center]TEAM PITA™ Don't settle for a wannabe, only accept the real deal.[/center]
Reply
#20
Okay finally managed to drag the car in for a bath and can now show the results.

In fact I'll show the progression of the car in the two and a half years that I've owned it ;)

As originally purchased:

[Image: Focus%20shotsttleredrollerskate.jpg]

Just before the lowering:

[Image: FocusClean07.jpg]

Lowered and cleaned:

[Image: DSC00690-1.jpg]

NefCanuck
Reply


Forum Jump:


Users browsing this thread: 6 Guest(s)