Posts: 749
Threads: 38
Joined: Feb 2011
Reputation:
2
Hey Guys... I'm gonna be my turbo kit this upcoming weekend and had a question regarding install. Which wires on the 07 MAF do i splice for an IAT sensor relocation?
I'm pretty sure I have every thing else figured out... Got 60# siemens deka, vacuum line, couplings, Tbolt clamps, Turbosmart dual port, 3" MAF tube, K&N air filter and precharger, heat shielding, earls 1.5 to -8AN oil pan fitting, oil feed T and earls oil feed fitting... I'm sure im forgetting a bunch of other stuff I have as well... If you guys think i'm missing anything or forgetting anything let me know.
thanks Korby
• 07 ST 23D • MBRP 2.25 cat-back • cfm 67mm TB • K&n Typhoon • Massive poly dogbone insert • Massive BSD • FRPP Dynamic springs & struts • carbon fibre shift boot & brake boot • SVT HVAC controls • steeda short throw shifter • Tinted w/ brow • SOON TO BE BOOSTED •
Posts: 4,124
Threads: 162
Joined: Mar 2005
Reputation:
2
I wish I could tell ya, but my focus is buried under snow still. Jamie might be able to pull the info. I'll try to get the car out on Sunday weather permitting.
Sold: 2001 SE 2.0L SPI w/60mm TB, Steeda Shorty Intake.
Active: 2007 SES Hatch, Motegi MR7 Rims with 215/45ZR17 Michelin Pilot Super Sport Tires, debadged, black painted calipers and drums, RS Knob, CFM Short Throw, Billet E-Brake, CFM Focus pedals, MBRP Exhaust, XCal2, FS Front and Rear Strut Tower Bars, Diamond Plate Floor Mats and Sills, Alpine MP3 Deck, Alpine V-Power 300w Amp, Pioneer IMPP Sub, AlpineType-S door speakers, VF Engineering Rear Motor Mount, F2 RS Spoiler, Tokico D-spec shocks, HTP Cross Brace, EBC Rotors, Hawk HPS Pads, Russell SS Brake Lines, RS Wheel, SVT Blue Seats, Vibrant 2.5" Race Highflow Cat, CFM UDP. Rear SVT bumper to come.
Active: 2005 Jeep Wrangler Unlimited TJ [LJ], Volant CAI, 32" BFG Mud Terrains, and a whole bunch of goodies. 
Posts: 5,027
Threads: 313
Joined: May 2003
Reputation:
21
(03-10-2012, 01:41 PM)MuskokaZX3 Wrote: Hey Guys... I'm gonna be my turbo kit this upcoming weekend and had a question regarding install. Which wires on the 07 MAF do i splice for an IAT sensor relocation?
I'm pretty sure I have every thing else figured out... Got 60# siemens deka, vacuum line, couplings, Tbolt clamps, Turbosmart dual port, 3" MAF tube, K&N air filter and precharger, heat shielding, earls 1.5 to -8AN oil pan fitting, oil feed T and earls oil feed fitting... I'm sure im forgetting a bunch of other stuff I have as well... If you guys think i'm missing anything or forgetting anything let me know.
thanks Korby
When I relocated my IAT it was the outside two wires that were cut - the other two were for the MAF.
Mind you that's for a Zetec - I can't guarantee it's the same for you.
Good luck with the install.
2008 Fusion SEL MTX - DD1 * 2009 Fusion SEL - DD2 * 2007 Focus ZXW - R*I*P * 2004 Focus ZTW CD Silver - sold * 2004 Focus ZTW Black - sold * 2003 Focus ZTW Black - sold * 2001 Focus ZTW Gold - sold * 2000 Focus SE Wagon (ZTW option) - Black - sold * 2000 Focus SE Wagon (ZTW option) - Gold R*I*P
2003 Focus ZX5 infra-red Track Rat - R*I*P
2003 ZX5 CD Silver Track Rat - retired, but still in the driveway
New track rat: 2000 ZX3, Atlantic Blue * JRSC with lots more to come
* New Zetec crate motor - NFG - thanks Topspeed *
Posts: 2,344
Threads: 157
Joined: Jun 2008
Reputation:
3
OoOoO can't wait
2000 dark violet pearl zx3: eagle rods, je pistons, fidanza cam gears, arp studs, ford racing highlift valve springs, svt front/rear disc conversion, prothane total kit, fc 65mm throttle body Tial gt3071r, tial mvs wastegate, tial Q bov, top speed "street" manifold,down pipe and dump tube, greddy boost controller, siemens deka #61 injectorz, stage 4 bully clutch way to much more to list
Instagram @o_so_slo
Posts: 749
Threads: 38
Joined: Feb 2011
Reputation:
2
03-11-2012, 12:48 AM
(This post was last modified: 03-11-2012, 12:49 AM by MuskokaZX3.)
Oscar if you could take a peek that'd be awesome... As far as the outer two wires go ken, that's what I remember reading somewhere, but I can't remember if it was for the zetec or dtec... And all I can find on the forums are jrsc IAT relocation questions...
(03-10-2012, 11:53 PM)drunkinmonkey Wrote: OoOoO can't wait
You and me both!!! Was supposed to be installing it right now, but a couple things didn't work out
• 07 ST 23D • MBRP 2.25 cat-back • cfm 67mm TB • K&n Typhoon • Massive poly dogbone insert • Massive BSD • FRPP Dynamic springs & struts • carbon fibre shift boot & brake boot • SVT HVAC controls • steeda short throw shifter • Tinted w/ brow • SOON TO BE BOOSTED •
Posts: 2,547
Threads: 149
Joined: Jun 2008
Reputation:
2
korby, text me later on, i will be with my car and can check the wires but will need a friendly reminder!
2007 ZX4 2.0l unaturally aspirated
FSwerks stage 2 Turbo kit, Cosworth Intake Manifold, 3" custom HKS turbo back
regular stage 2 @10ps : 232whp/219wtq
stage 2 plus @ 13psi: 278whp/229wtq
Stage 2 plus @15psi: 296whp/240wtq
2013 Focus ST Tuxedo Black - The daily
Posts: 749
Threads: 38
Joined: Feb 2011
Reputation:
2
03-11-2012, 04:51 AM
(This post was last modified: 03-11-2012, 04:53 AM by MuskokaZX3.)
awesome, thanks man... text on its way
• 07 ST 23D • MBRP 2.25 cat-back • cfm 67mm TB • K&n Typhoon • Massive poly dogbone insert • Massive BSD • FRPP Dynamic springs & struts • carbon fibre shift boot & brake boot • SVT HVAC controls • steeda short throw shifter • Tinted w/ brow • SOON TO BE BOOSTED •
|
Hi, Guest
